For Sale OHMEDA Ohmeda Giraffe Omnibed Oem Model 101 Complete In-Bed Scale Assy Tested Infant Incubator Parts P/N 6600-0501-900

About This Item
Actual item shown, removed from tested working machine by professional technicians and re-certified for dependable daily use. Only what is shown is included. Please contact us if you have specific part related questions.

Know What You are Buying

We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Ohmeda
Part # 6600-0501-900
SKU: 116472



Note-Our parts are in-stock! Ships from our warehouse immediately. Removed from bed tested & working properly before parts harvest. This is a fully tested part.



TESTED Parts – these parts were all tested and confirmed functional in all modes in our professional shop before parts harvest. Machine was GE Healthcare / Ohmeda Medical Giraffe Omnibed 6651-0008-901 with S/N HDHJ50111 w/ Ebase Eng S-HUMID S-HOOD

Description – Oem Model 101 with MPN M1125056 and Serial G404162C – Tested system – Fdrom Mfgr - The scale Giraffe™ in-bed is the accessory part of an incubator and warmer. It is located in the bed, which is used to weigh the patient. It consists of the top housing, bottom housing and strain relief. The Scale cable RS – 485 is used to communicate the scale with the main processor by using the Lemo connector and the connector is having probe panel housing. The graphics display is placed on the warmer. It is used to display the weight measured by the scale

Comps – Ohmeda Giraffe Omnibed Family Machines

Other Numbers – 66000501900 M1125056

Thanks for looking!

Return Policy

5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender. If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item. NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.