For Sale MEDRAD/STELLANT Dual Headed Injector CT

2018 MEDRAD STELLANT DUAL HEAD INJECTOR – MXR108524

FLEX FLAT MONITOR CONSOLE
· Includes 60 Day Parts Warranty
· Fully Refurbished
· Full PM
· Injector Heads
· Pedestal
· Monitor
· Base Unit
· 2 Power Cords
· Injector To Base Cable
· Monitor To Base Cable
· 2 Syringe Heaters

MEDRAD STELLANT DUAL HEAD CT INJECTOR
System Specifications Injection
• Flow Rate (range & increments) 0.1 to 10 mL/sec in 0.1 mL increments
• Volume (range & increments) 1 mL to syringe capacity in 1 mL increments
• Programmable Pressure Limit 200 mL syringe: 325 psi, 2241 kPa (psi/kPa)
• Reminders 0-300 seconds (5 minutes) in 1 second increments
• Pause 1-900 seconds (15 minutes) in 1 second increments
• Hold Maximum HOLD time is 20 minutes
• Syringes (Volume capacity) 200 mL sterile disposable syringe
• Maximum Number of Phases 6
• Maximum Number of Protocols 250
• Miscellaneous Specifications
• Electrical Requirements (VAC/Hz) 100-240 VAC, 50/60 Hz, 300 Volts-AMPs
• Syringe Heat Maintainer Range 95 degrees F +/-9 degrees 35 degrees C +/-5 degrees
• DualFlow Simultaneous Injection of Contrast and Saline

Mechanical Specifications
Dual Injector Head
• HEIGHT 6.1” (15.5 cm)
• WIDTH 12.1” (30.7 cm)
• DEPTH 14.5” (36.8 cm)
• WEIGTH 17.9 lb (8.1 kg) (without syringe)
Base Unit
• HEIGHT 11.5” (29.2 cm)
• WIDTH 11.0” (27.9 cm)
• DEPTH 8.8” (22.2 cm)
• WEIGTH 13.6 lb (6.2 kg)

Includes:
• Hand Switch
• Display control unit
• Base unit
• Floor Pedestal Cart
• 1 syringe heater
• Power cord
• Display control unit to base unit cable
• 50 ft interface cable
• 90 days parts warranty
• Manual
• 90 Days parts only warranty
• Calibrated

AVAILABLE: NOW
LOACATION: NJ WH

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.