For Sale FORMULATRIX Tempest V3.1 Formulatrix Tempest V3.1 Liquid Handler Nanoliter Multichannel Reagent Dispenser

For Sale Formulatrix Tempest V3.1 Liquid Handler Nanoliter Multichannel Reagent Dispenser

Pre-owned instrument
• Fully Functional
• Current model
• Serviced & in Stock
• Good cosmetic condition
• Warranty

Here is what you will receive:
• Formulatrix Tempest V3.1 Liquid Dispenser
• Vacuum Pump
• Computer running Tempest v3.1 Software
• Communication and power cables
• Six used chips are included, so you can test the instrument once you receive it before purchasing new chips.

Formulatrix Tempest V3.1 Liquid Handler Configuration:
• Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom)
• Version 3 has upgraded plate clearance to accommodate dispensing into deep well blocks
• Volume range: 200nL with no upper limit
• Dispense Method: high-volume non-contact micro-diaphragm dispense chips (Qty. up to 12)
• 6 chips total installed alternating between High and Low volume: 3 high volume and 3 low volume
• Max reagents: dispense up to 12 different reagents; 96 independently controlled outputs.
• Features: independent channel control, can unclog itself, two separate wash inputs, removable nozzles, can dispense beads/cells
• Dispense rate for 200 nL to 96-well plate: ~3 seconds
• Dispense rate for 200 nL to 384-well plate: ~6 seconds
• Dispense rate for 5 uL to 96-well plate: ~4 seconds
• Dispense rate for 1 uL to 384-well plate: ~5 seconds
• Dispense rate for 10 uL to 384-well plate: ~9 seconds
• Dispense rate for 20 uL to 384-well plate: ~13 seconds
• Microfluidic chip dead volume: less than 40 uL
• Pipette tip dead volume: less than 100 uL
• Power requirements: 100-240 VAC, 50-60 Hz, 125 W
• Pressure: 30-35 psi @ 0.15 cfm = 2.0 bar @ 4.3 lpm
• Vacuum: 22 inHg @ 0.2 cfm= -750 mbar @ 5.7 lpm
• Dimensions (WxDxH): 55.5 x 32.5 x 26.5 cm. | 22 x 13 x 10.5 in.
• Weight: ~11.5 kg | ~25 lb

Customization/Options: N/A

Testing performed by our in-house service team:
• We check the system successfully powers on and initializes.
• We establish software communication.
• We run system prime and wash procedures.
• We verify fluid retrieval.
• We check for accurate fluid dispensing.
• We test and confirm variable volume output.
• We test the plate detection.
• We verify the plate carrier’s X and Z-axis movement is smooth and accurate.
• We verify the dispenser head's Y-axis movement is smooth and accurate.

Instrument Overview:
• Formulatrix Tempest V3.1 Liquid Handler offers precise liquid handling for accurate results.
• With high-throughput capability, it ensures efficient sample processing.
• The intuitive software interface makes the operation user-friendly.
• Versatile dispensing options cater to a wide range of applications.
• This instrument provides fast and accurate dispensing.
• Count on its reliable performance for consistent outcomes.

Instrument Application:
• High Throughput Screening (HTS)
• Assay Development and Design of Experiment (DoE)
• Enzyme-linked immunosorbent Assays (ELISA)
• Polymerase Chain-reaction (PCR) Workflows - Real-time and Digital
• Biochemical assay development and screening
• Cell Culture and Bead-Based Assays
• Next Generation Sequencing (NGS) - Library Preparation

The key features of Formulatrix Tempest V3.1 Liquid Handler:
• High Precision
• Low Volume Dispensing
• Minimize Reagent Waste
• Speed and Throughput
• Keep Cells and Beads Suspended
• Integrate with External Systems

Why should you buy from us?

Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping.
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Many upgrade and repair parts are in stock.
• Remote installation and instrument operation training are available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee
• It will work!
• Warranty
• You get after-sales technical support.
• Smooth process from the initial quote to order fulfillment.
• Customer references are available.

This will ship via freight. Please contact us with your zip code to obtain a shipping quote.
*SM* Small Crate
200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.

DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.

ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.