For Sale OBDUCAT QS200 Obducat QS200 Quickstep Spinner & Hotplate Platform Spin Coater

For Sale Obducat QS200 Quickstep Spinner & Hotplate Platform Spin Coater

• Fully Functional
• Serviced & in Stock
• Current Model
• Made in 2020
• Good cosmetic condition
• Technical sales consultation available
• WARRANTY

________________________________________
Here is what you will receive:
• 1x Obducat QS200 unit
• 1x Hard-wired power supply cord
• 1x Vacuum pump & hard-wired power cord
• Papercopy of the manual

Obducat QS200 Quickstep Spinner Platform Configuration:
• Material of the working chamber: polypropylene
• Program input: via touchscreen
• Number of programs: unlimited
• Number of stages per program: unlimited
• Process time: 0.1-999 seconds, step 0.1 second
• Plate dimensions: round 200 mm, square 150x150 mm
• Centrifuge speed: 1-10,000 rpm, step 1 rpm (depending on the weight and size of the substrate)
• Heating temperature: up to +300DegC
• Temperature stability: ±1DegC at 100DegC
• QS 200 Substrate size: 2”to8” Ø or 2”x2” to 6”x6”
Exhaust Air:
• Module 1 exhaust- at least 80m^3/h
• Module 2 exhaust- at least 80m^3/h
• Process Bowl Exhaust- at least 180m^3/h
• Hotplate Exhaust- at least 180m^3/h
Supply Air:
• Minimum 6.0 bar (87PSI) unregulated, dry, oil-free
• Solid-state pollution not greater than 40 microns
• Liquid particles not greater than 0.02PPM
• Plug in fasteners.10mm or thread 3/8"
Vacuum:
• min -0.7 bar regulated
• Plug in fastener s.10mm or 3/8" thread
Media Disposal:
• Screw-in Screw 3/4", in waste tank 5L
Noise Level:
• LPA 70dB Idle Noise
• LPA 70dB Operating Noise
Environmental Conditions:
• Temperature: 20DegC to 25DegC
• Humidity: 0-60% non-condensing
General Machine:
• Dimensions: (WxDxH): 1200x650x1300cm
• Weight: approx. 400kg/880lbs
Energy Supply:
• Voltage 400VAC
• Supply 3PH+N+PE, 3x16A, 50Hz
• Control Voltage 24V

Customization/Options: N/A

Testing performed by our in-house service team:
The Obducat QS200 Quickstep Spinner Platform passed all tests and was found to be fully functional:
• We powered on the unit, and the control software booted successfully.
• We tested the touchscreen functionality.
• We initialized the hot plate, including the pin lift and home position.
• We verified the hot plate temperature controls, including target temperature, actual temperature, and temperature over time.
• We initialized the chuck, including the home position and pin lift, and tested its controls for speed and acceleration.
• We checked the chuck cover initialization and verified its controls for closed, middle, and open positions.
• We tested the media dispense arm initialization and confirmed its control functions for lifting and rotating.
• We tested the syringe dispenser and its controls, including home position, dispense volume, velocity, and suck-back volume/velocity.
• We created and programmed process recipes, defining parameters such as spin speed, acceleration, dispense volume, temperature, and timing.
• We verified the vacuum controls on the hot plate and chuck.

Instrument Overview:
• The Obducat QS200 Quickstep Spinner & Hotplate Platform is designed for precise coating and baking processes.
• Features an integrated hotplate with temperature control for uniform heating.
• Equipped with a high-speed chuck for controlled spin coating at adjustable speeds.
• Includes a media dispense arm for accurate liquid distribution and process automation.
• Vacuum controls on the chuck and hotplate ensure stable substrate handling.
• Compact and robust design suitable for various laboratory environments.

Instrument Application:
• Spin coating of photoresists and polymers
• Thin film deposition for semiconductor processing
• Substrate baking for uniform material curing
• Surface treatment for nanofabrication

The Key Features:
• Spin coating & baking in one compact system
• programmable spin speed & ramp control
• Hotplate with precise temperature control
• Uniform coating for various substrates
• User-friendly touchscreen interface
• Compatible with multiple resist types

Why do so many customers choose to order from us?

Our Advantage
• We have experience servicing and repairing these instruments.
• This instrument goes through all the described service steps before shipping. see the questions section below
• We offer detailed photos and videos of the instruments you buy.
• We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
• We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
• Technical sales consultation available
• Remote installation and instrument operation training may be available.
• On-site installation may be available in the Boston Area (New England area)
• US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee
• Warranty
• An extended warranty may be available
• You get after-sales technical support
• Customer references are available
• The instrument will be fully functional!
• Smooth process from the initial quote to order fulfillment

________________________________________
This will ship via freight. Please contact us with your zip code to obtain a shipping quote.
1200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

TO VIEW ADDITIONAL PHOTOS, VIDEOS AND VERY DETAILED INFORMATION SUCH AS TEST STEPS PERFORMED, CONFIGURATION, ETC., PLEASE VISIT OUR WEB SITE. TO GET THERE PLEASE CLICK ON “WEBSTORE”; TO YOUR RIGHT AND YOU WILL SEE LINK TO OUR SITE IN THE MIDDLE OF THE SCREEN. THEN USE LAST 5 DIGITS OF MPN NUMBER IN THE SEARCH FIELD TO LOCATE YOUR ITEM.

DO NOT HESITATE TO CALL US OR EMAIL US WITH ANY QUESTIONS YOU MIGHT HAVE.

ALL OF OUR ITEMS ARE AVAILABLE FOR INSPECTION AT OUR FACILITY.

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.