For Sale WATERS Acquity Sample Manager

MPN: ARRAY(0x564d708c6ba0)
Up for sale is a Waters Acquity Sample Manager. It was acquired from a working lab and was tested as part of a bigger Waters Acquity system that was taken apart. It comes exactly as shown.

Specifications:

Number of sample plates: Total of two plates, expandable to up to 22 plates with optional Sample Organizer (see below):

96 and 384 microtiter plates

48 position 2.00-mL vial plates

48 position 0.65-mL micro-centrifuge tube plates

24 position 1.50-mL micro-centrifuge tube plates

Maximum sample capacity: 768 in two 384-well plates; expandable to up to 8,448 samples with optional Sample Organizer

Number of sample injections: 1 to 99 injections per sample

Injection volume range: 0.1 to 50.0 iJL, in 0.1 iJL increments, partial or full loop mode; 10ul loop is standard; 1, 2, 5, 20, and 50-uL loops also available

Sample delivery precision(full loop injection mode): < 0.3% RSO, full loop, standard lO-iJL loop (default wash/purge conditions), per Waters AQT/SystemsQT protocol

Sample delivery precision(PLNO injection mode): < 1% RSO within 20% to 75% of loop volume for 1, 2, 5, 10, 20, and 50-iJL loops, UV detection

Injector linearity: > 0.999 coefficient of deviation (from 20% to 75%, partial loop overfill mode (PLNO injection mode), per Waters AQT/SystemsQT protocol

Sample temperature control:0 to 40.0 C, settable in 0.1 C increments (assumes an ambient temperature of 25.0 C). At an ambient temperature of 21.0 C or lower the sample manager will maintain the temperature of the sample compartment down to 4.0 C with a tolerance of -2.0/+6.0 C, when configured with the maximum number of vials and/or plates

Injection cycle time:

< 15 sec between multipe injections with load ahead enabled, 30 sec with single weak wash, lO-iJL loop, pressure assist mode

Sample probe: XYZZ based needle-in-needle design

Minimum sample required: 5 uL residual, using maximum recovery 2-mL vials (zero offset)

Wash solvents: Two degassed: strong solvent and weak wash solvent, programmable to suit application

Sample carryover: < 0.005% or < 2.000 nL, whichever is greater

Advanced operations: Loop off-line mode, load ahead

Unattended operation: Leak sensors, full diagnostic data control captured through console software

Primary wetted material: Titanium alloy, 316 stainless steel, fluoropolymer, fluoroelastomer, PPS alloy, PEEK alloy, PPS, PEEK, OLC coating, gold

Model: 186015006
Type: Acquity Sample Manager (HPLC autosampler)
Function: Automated sample injection for Acquity systems
Components: Tray, injection module (as shown)
Use Case: UPLC/HPLC workflows

This unit ships via postage. Expedited shipping is available if needed. Local pickup from Fairfax, VA, is available as well.

Seller Name:

Seller Fairfax, VA

Seller

Inventory ID: 6007

Thanks for looking! At , we understand you have many choices, and we appreciate the opportunity to earn your business. We strive to provide you with the best products and services at the best prices. Please reach out for any reason.

Return Policy