The TL-3000B automatic lensmeter with a color touch screen, simple operation using pictograms and great lens measurement capabilities will provide any user with a clear observation of the data and an absolutely simple operation that does not require any special skills.
The TL-3000B has a program for calculating refractive indices. The metrics are calculated automatically after entering the curvature values. The system automatically detects and calculates all progressive lenses.
You can also measure modern multifocal lenses in the far, near, and middle areas. QC mode — quality control mode, provides data on the quality of alignment in accordance with the laboratory parameters.
Features:
Color touch screen
Modern progressive mode (FAR, MID, NEAR)
Quality control mode
Ultraviolet light measurement
Wide measurement range (-80 to +80dptr)
Measurements of the interpupillary distance
Calculation of refractive indices
Data recording (up to 99 measurements)
Precise marker (metal)
RS-232 °C port
Built-in printer
Parameters
Sphere 0 ~ ±25.00 dptr
Cylinder 0 ~ ±10.00 dptr
Cylinder axis 0 ~ 180° (1°)
Additional optical power 0 ~ 10 dptr
Prismatic optical power 0 ~ 10 dptr
Contact lens measurement range 0 ~ ±80.00 dptr
Measurement step
Diopters 0.01 / 0.125 / 0.25 dptr
Prismatic diopters 0.01 / 0.125 / 0.25 dptr
Measurement modes
Cylinder - , + , ±
Prisma Prismatic Rectangular/Polar / Offset
Measurement time 0.035 sec
LED wavelength 660 mm
Diameter of the measured lenses 20 ~ 100mm (5mm - for contact lenses)
Interpupillary distance measurement From 50 to 86 mm (0.5 mm pitch)
Measured lenses tyoe Single, bifocal, trifocal, progressive, prismatic.
ABBE numbers 30 ~ 65 (step 5)
Data output RS - 232C
Screen 5.7”, touch screen
Printer Built-in thermal printer
Size 220 x 260 x 438
Weight: 7kg
Power consumption AC 100 ~ 240V, 50 ~ 60Hz
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
