M1019A Module M1657B water trap PN: PWM-CA20-008-30 for compatible water trap
The **M1019A Module** and **M1657B Water Trap** are components used in ** IntelliVue patient monitoring systems**, specifically for **capnography (CO₂ monitoring)**. These parts play a critical role in ensuring accurate and reliable CO₂ measurements, particularly in intubated or ventilated patients.
---
**Overview of the M1019A Module and M1657B Water Trap:**
**M1019A Module**:
- **Function**:
- The M1019A is a **capnography module** that measures end-tidal CO₂ (EtCO₂) and respiratory rate.
- It is used in conjunction with the Philips IntelliVue monitoring system to provide real-time CO₂ monitoring for ventilated or sedated patients.
- **Key Features**:
- Accurate and reliable CO₂ monitoring.
- Compatible with Philips IntelliVue monitors (e.g., MP Series, MX Series).
- Supports both mainstream and sidestream capnography.
---
**M1657B Water Trap**:
- **Function**:
- The M1657B is a **water trap** used in sidestream capnography systems.
- It prevents moisture (e.g., condensation, saliva) from entering the sampling line, which could otherwise interfere with CO₂ measurements or damage the module.
- **Key Features**:
- Easy to install and replace.
- Transparent design allows for visual inspection of moisture accumulation.
- Compatible with Philips IntelliVue sidestream capnography systems.
---
**Applications**:
- **Critical Care**: Monitoring CO₂ levels in intubated or ventilated patients in ICUs or operating rooms.
- **Emergency Medicine**: Assessing respiratory status in emergency or trauma situations.
- **Procedural Sedation**: Ensuring patient safety during sedation procedures.
---
**How to Use the M1019A Module and M1657B Water Trap**:
1. **Setup**:
- Connect the M1019A module to the IntelliVue monitor.
- Attach the M1657B water trap to the sidestream sampling line.
2. **Sampling Line Connection**:
- Connect the sampling line to the patient’s airway (e.g., endotracheal tube or nasal cannula).
- Ensure the water trap is positioned correctly to collect moisture.
3. **Monitoring**:
- Observe the CO₂ waveform (capnogram) and EtCO₂ values on the monitor.
- Adjust settings (e.g., alarm limits) as needed.
4. **Maintenance**:
- Regularly check the water trap for moisture accumulation and replace it when necessary.
- Clean the sampling line and replace it if clogged or damaged.
---
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.