For Sale PHILIPS MX500 / MX550 PN:453564456791 Philips IntelliVue MX500 / MX550 Monitor Module Monitor Parts P/N 453564456791

PN:453564456791 Philips IntelliVue MX500 / MX550 Monitor Module Interface Board

Compatible Models: Philips IntelliVue MX500, MX550 Patient Monitors
OEM Part Numbers:
453564456791 (Main Module Interface Board)
453564456792 (Revised Version)
453564429141 (Module Slot Backplane Board)
866066 (Integrated Module Interface Assembly)
1. Module Slot & Compatibility
Number of Module Slots: 3 × Plug-in Module Bays
Supported Plug-in Modules:
IBP (Invasive Blood Pressure): M1006B
SpO2 (Pulse Oximetry): M1020B
TEMP (Temperature): M1029A
CO2 (Microstream): M3015B
BIS (Bispectral Index): M1034B
NMT (Neuromuscular Transmission): 865383
IntelliBridge EC10: 865115
Recorder: M1116B/C
G7m Gas Analyzer: 866173
Module Bus: High-speed proprietary parallel digital bus
Module Hot-Swappable: Yes (Power-safe, live insertion/removal)
2. Interface & Connectivity
Host Connection:
High-speed parallel bus to Main CPU Board
SMBus for module power/thermal management
Module Connectors:
2 × 64-pin high-density board-to-board connectors
Gold-plated contacts, anti-corrosion
Status Indicators:
LED: Power (Green), Communication (Yellow), Fault (Red)
IntelliBridge Support:
Up to 2 × IntelliBridge EC10 Interface Boards
Protocols: ISO/IEEE 11073-30200, RS-232, LAN
3. Electrical Specifications
Supply Voltage:
Main: +12 VDC ± 10%
Aux: +5 VDC ± 5%, +3.3 VDC
Power Consumption: ≤ 8 W (full 3-module load)
Overcurrent Protection:
Per-slot electronic fuse (resettable)
Over-voltage / reverse-polarity protection
Isolation:
Patient-to-module: 4000 VAC (2 MOPP)
Module-to-host: 1500 VAC
ESD Protection: IEC 61000-4-2, ±8 kV contact, ±15 kV air
4. Signal Specifications
Data Rate: 100 Mbps parallel bus
Sampling Sync: 1 kHz system-wide sampling sync
Noise Rejection:
CMRR ≥ 120 dB (50/60 Hz)
EMI/RFI filtering per IEC 60601-1-2
Signal Resolution: 16-bit analog-to-digital conversion
5. Physical & Environmental
Dimensions: 148 × 105 × 12 mm
Weight: 110 g
Board Layer: 8-layer FR-4 (medical grade)
Operating Temp: +10°C ~ +40°C
Storage Temp: -20°C ~ +70°C
Humidity: 10% ~ 95% RH (non-condensing)
Vibration: 2 g peak (5–2000 Hz)
6. Safety & Compliance
Safety: IEC 60601-1, IEC 60601-2-49
EMC: IEC 60601-1-2
Certifications: CE, FDA, RoHS
Defibrillator Proof: Yes
Isolation Grade: 2 × MOPP (Means of Patient Protection)
7. Features
Automatic module detection & configuration
Per-slot power control & thermal monitoring
Fault diagnosis & self-test on boot
Firmware upgradable via host monitor
Anti-static coating

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.