MPN: 20031
br vocab="" typeof="Product"> This Pneuton Mini Ventilator was previously used in a medical facility and is in excellent used condition showing very little signs of previous use. It is in guaranteed not to be DOA. It is pneumatically powered for use on neonatal, infant and pediatric patients.
Pneuton Mini Pneumatic Portable Ventilator Neonatal Infant Pediatric Airon 20031
Pneuton Mini Pneumatic Portable Ventilator Neonatal Infant Pediatric Airon 20031
Click images to enlarge
Description
This Pneuton Mini Ventilator was previously used in a medical facility and is in excellent used condition showing very little signs of previous use. It is in guaranteed not to be DOA. It is pneumatically powered for use on neonatal, infant and pediatric patients.
pNeuton mini Ventilator is designed for
ER
MRI
OR
NICU
Air, ground or Intra-hospital transport
SPECIFICATIONS
Airon Pneuton PN:20031
Pneumatically powered for use on neonatal / infant and pediatric patients
Patient range 400 gram to 25 kilogram
Modes CMV, IMV + CPAP or CPAP only continuous flow pressure limited ventilation
Pressures displayed on manometer
MRI conditional 3 T or less, maximum spacial gradient magnetic field of 720-gauss/cm or less, no gauss line restriction
Gas consumption flow setting + 3 L/min
Size 6.0 h x 8.7 w x 7.8 d (15.2 cm x 22.1 cm x 19.8 cm)
Weight 9 lbs (4 kg)
Input gas requirement (oxygen and medical air): 55 psi 15 psi (3.8 bar 1 bar) each gas
Classification according to MDD 93/42/EEC: IIb
Meets International Standards for transport ventilators: ASTM F1100-90 Ventilators Intended for Use in Critical Care
ISO 10651-3:1997 Lung Ventilators for Medical Use- Particular requirements for emergency and transport ventilators
Airworthiness: RTCA DO-160G Environmental Conditions and Test Procedures for Airborne Equipment, as applicable
CONTROL SETTINGS
Inspiratory time: 0.25 to 2 seconds
Expiratory time: 0.25 to 20 seconds
Continuous Flow: 6, 8, 10, 15 or 20 L/min
Peak pressure: 15 to 60 cm H2O (mbar)
PEEP / CPAP: 0 to 20 cm H2O (mbar)
Oxygen: 21 to 100% 3%, requires oxygen and medical air source
AUDIBLE AND VISUAL ALARMS
All pneumatic alarm system (no batteries requires minimum 30 psi / 2 bar gas supply pressure)
Remote alarm output connection
Patient circuit disconnection Automatic reset when alarm condition resolves
20-second silence/reset button
10-second activation
High pressure independently adjustable from Peak Pressure
Low gas source pressure If either source gas drops below 40 psi (2.8 bar)
Continues operation as long as oxygen is available
Manufacturer's Description
Neonatal or infant critical life support in the ER, MRI, OR, ICU and transport.
The pNeuton mini Ventilator provides ventilatory support to neonatal, infant and pediatric patients, and accommodates even the most fragile patients from 400 grams to 25 kilograms.
A fully pneumatic ventilator, the pNeuton mini is built to support patients non-invasively using nasal prongs / masks for CPAP application, or ventilation + CPAP with endotracheal tubes for full support.
With a built-in oxygen blender, and precise timing & pressure controls, the pNeuton mini matches the complexity of pressure-limited ventilation in standard infant ventilators.
The pNeuton mini is also compatible with the Life Pulse High-Frequency Jet Ventilator from Bunnell Incorporated to provide conventional ventilation in tandem with the Life Pulse without interfering with high frequency ventilation or nuisance alarms. This broadens the clinical application and prepares the clinician to meet patient needs during transport.
The pNeuton mini easily accommodates air or ground transport, as well as within the hospital. Due to Its unique pneumatic design, the mini is always ready to go anytime, anywhere.
UNIQUE ADVANTAGES
Fully pneumatic No batteries or electricity needed
Invasive or non-invasive ventilation
Built-in oxygen blender, and precise timing & pressure controls
Ideal for transport within the hospital as well as via ground or air
Compatible with the Life Pulse High-Frequency Jet Ventilator from Bunnell Inc.
MRI compatible up to 3T can be placed next to the magnet with remote alarm
Small, lightweight, portable
Easy-to-use controls
Made in Melbourne, Florida,
Benefits FOR THE PATIENT
- A wide range of continuous flow settings to provide the right ventilation for the size of your patient with the least amount of expiratory flow resistance
- Adjustable oxygen delivery from 21% to 100% to precisely match patient oxygen requirements
- Switch from CPAP nasal prongs, face mask to mechanical ventilation seamlessly and without interruption
- One ventilator with no change in patient circuit wherever patient care and diagnostic procedures are needed
BENEFITS FOR YOU, THE HEALTH CARE PROVIDER
- Calibrated controls for precise and easy operation
- Night visible manometer to monitor patient pressure and effort
- Patient disconnect and high-pressure alarms that work during non-invasive and invasive ventilation
- MRI conditional up to 3 T place right next to the scanner with remote alarm output for the control room
- Oxygen powered no electrical connection or batteries
- Rugged and tested to meet airworthiness standards with everything built-in no accessories needed
Protection for the caregiver from patient exhalation using the bacteria / viral filter
BENEFITS FOR YOUR BUDGET
- Switch from invasive ventilatory support to non-invasive with just a simple change of the patient interface
- Lightweight and portable with attachment to any patient care incubator/bed
- Minimal oxygen consumption to maximize transport times
- No batteries or electronics decrease preventative maintenance costs
Condition
This Pneuton Mini Ventilator was previously used in a medical facility and is in excellent used condition showing very little signs of previous use. It is in guaranteed not to be DOA.
Dimensions
6.0 h x 8.7 w x 7.8 d (15.2 cm x 22.1 cm x 19.8 cm)
9 lbs (4 kg)
Warranty
I stand behind everything I sell and for 30 days I guarantee this Pneuton Mini Ventilator is exact to the description and pictures I have provided here or return it for refund.
Shipping
Weight before packing is 9 lbs for everything pictured
All buyers may use the shipping calculator
Pickup is always welcome from our warehouse in Pittsburgh, PA
_____________________________________________________________________________________________________
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof. This item has been cleaned and handled in accordance with the manufacturer's instructions..
Pictures sell!
Auctiva offers Free Image Hosting and Editing.300+ Listing Templates!
Auctiva gets you noticed!
The complete Selling Solution.
Track Page Views With
Auctiva's Counter
Return Policy