About This Item
Actual item from lot is shown. Used pull, inspected thoroughly. Only what is shown is included. Guaranteed functional and guaranteed for 30 days.
Know What You are Buying
We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience
DESCRIPTION
Manufacturer - Belmont
Part # HH-1055B
This part was fully tested in the machine before parts harvest to assure a fully working part and certified to be in as new condition
Alt mpn HH-1055B-6.3D
This filter has been designed in cooperation with Vicor engineers to work with the Vicor Harmonic Attenuator Module (HAM). The filter provides the correct attenuation for the HAM to meet the European an US conducted emissions requirements. The filter also has the transient protection required to protect the front end of the HAM from damage due to transients.
The standard model will meet most applications.
Operating voltage = 85 to 250 V~ Operating current = 6.3 Amp Operating frequency = 50/60 Hz Oper. temperature (-6.3) = -20 to 50o C
(see derating chart ) Oper. temperature (-6.3B) = -40 to 50o C (see derating chart ) Diel. withstanding (line - case) = 1500 Vac Diel. withstanding (line - line) = 1500 Vdc Leakage current = 1.0 ma at 220 Vac, 50 Hz Max residual voltage after 1 sec. = 34 Volts Agency approvals = UL, CSA, TUV Designed with Vicor for use on their HAM module
Return Policy
5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender.
If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item.
NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.