For Sale BELMONT Belmont Buddy Plus Fluid Warmer Vicor HAM Harmonic Attenuation Module Tested Parts P/N VI-HAM-CM

About This Item
Actual item from lot is shown. Used pull, inspected thoroughly. Only what is shown is included. Guaranteed functional and guaranteed for 30 days.

Know What You are Buying

We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Belmont
Part # VI-HAM-CM
This part was fully tested in the machine before parts harvest to assure a fully working part and certified to be in as new condition

Harmonic Attenuation Module. Compatible with VI-26x and VI-J6x modules

From the Mfgr -  The HAM module is a full-wave rectifier with a proprietary high-frequency Zero-Current Switching (ZCS) boost converter providing up to 675W of power in a package measuring only 4.6 x 2.4 x 0.5in [116.9 x 61 x 12.7mm]. The combination of the High-Boost HAM and our V375, VI-26x or VI-J6x DC-DC converters provides the powertrain for a high-density, switching power supply meeting EN61000-3-2 requirements for harmonic current content with a power factor better than 0.99.

Additional Info - The Harmonic Attenuator Module (HAM)

accepts an input of 85 – 264VAC. It

provides a DC output compatible with

Vicor’s VI-26x, VI-J6x and user-defined

Maxi, Mini and Micro DC-DC converters.

All wires have been cut and will need connectors to connect to your machine.

Return Policy

5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender. If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item. NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.