For Sale PALCO NEW Laboratories Model 400 Pulse Oximeter w/ Accessories PAL-010-400 AC/DC Oximeter - Pulse

Model 400 Pulse Oximeter
New Unit
Desk Top or Hand Held
p/n 010-400
Made in U.S.A.


Now discontinued, a new unit, made in the U.S.A.

The Palco 400 is Palco's deluxe handheld or desktop oximeter. The Palco 400 is designed with an integral (built-in) printer, which has selectable automatic print-intervals. A printout can be obtained every 15, 30, or 60 seconds or at other intervals up to 10 minutes. Palco 400 is compatible with all Opto-Plethsymographic Palco probes and sensors.

The Palco 400 also features special screens for Nighttime Desaturation:
- Mode 1: All low saturation events below a pre-set point are recalled for later printout.
- Mode 2: The oximeter recalls the lowest point reached during consecutive two-minute periods for the entire monitoring session. Tape printouts include the percentage of time below 90, 80, 70 and 60% saturation.

Other Features:
- Easily changed snap-in paper cartridge
- Rechargeable battery pack with 4 hours continuous life, 8 hour charge
- External battery pack can be changed in seconds for continuous monitoring
- Weighs only 3 lbs
- Alarms for saturation and rate

Specifications

Dimensions

Width x Height x Length:
14.0cm x 6.5cm x 30.0cm
5.5in x 2.5in x 12in

Weight: 1.36 kilos (3 lbs.)

Power Ratings

Battery Type: NiCad rechargeable
Battery Life: 4 hours continuous, with 8 hour charge
A/C Adaptor:
120V, 60Hz AC to 18V DC
(or) 220V to 240V, 50Hz AC to 18V DC

Sensors

Sensor Compatibility: Uses all Palco Opto-Plethysmographic sensors

Oxygen Saturation and Pulse Rate

Display:
Two 3-digit, 7-segment LED
1.5cm (0.6 in) high characters

Resolution:
1% SpO2 or 1 beat/minute (BPM)

Range:
SpO2: 0 to 100%
Pulse: 25 to 250 BPM

Accuracy:
SpO2:
100 to 70%, ±2%
69 to 60%, ±3%
Less than 60% unspecified

Pulse:
25 to 250 BPM, ±2

Alarms
Saturation
Rate

Return Policy

Items are sold as-is with no returns or refunds available unless explicitly stated.