Seller assumes all responsibility for this listing..
Condition: Used - Good
Model: ACP 100 USB
USED CARD SCANNER, good conditio as You see at pictures, special price for it
The Model ACP-100 Optical Mark Reader is the latest design developed by Chatsworth Data Corporation to support gaming, evaluation, and data collection applications. The ACP (Accessible Card Path) design was specifically developed for use in Gaming/POS applications, incorporating a unique feature which allows easy access to the card path and optic lens for clearing obstructions and performing preventative maintenance on the unit.
Significantly faster than keyboard entry, the ACP-100 reads one side of an input form automatically and without error as it scans and transports data. Once the form has been scanned, the resulting data string is terminated by a carriage return (CR) and is automatically transported to the communication port of the attached computer. The operator and the speed of the computer control the processing speed of the forms. However, most 11-inch forms can be scanned at a rate of 1,500 to 1,800 forms per hour.
The ACP-100 utilizes “Visible Red” illumination reads black or blue marks made with a ballpoint pen or felt-tip pen as well as pencil, punched and pre-printed marks. Background printing must be in the visible red range. “Infra Red” illumination is available as an option for pencil only marking with colored background printing. A number of downloadable commands are available to modify the default configuration of the ACP-100 to support a wide variety of form designs and application requirements. The interface communication is either Asynchronous Serial RS-232C our USB. The Model ACP-100 is supplied complete with an external Universal Power Supply (100-240V / 47-63Hz), Serial or USB Cable (Macintosh or PC), Operator Guide, Test Cards, and a Utility Software Disk.
Paper Path The ACP-100 Reader has a paper path that is easily
accessible for clearing jams and cleaning the optic head.
A simple hinged connection allows the upper assembly
to open for complete access to the paper path
Scan Area Reads up to 12 rows at .25 inch centers x 80 mark positions
Free Method Manual insertion with powered transport
Feed through Software controlled, eject front or eject rear
Scanning Speed 20 inches (50.8 cm) per second
Approx. 25-30 cards per minute
Throughput Approx. 25-35 cards per minute
Form Size 3-1/4 inches x 5 inches to 3-1/4 inches x 14 Inches
8.2 cm x 12.7 cm to 8.2 cm x 35.6 cm
Paper Weight 18 to 100 lb. bond, ledger, index or OCR – .004 inches
Read Technique Graded Index fiber, single sided, manual feed
Form Marking (Visible Red Model): #2 Pencil, Blue or black ball point pen, Blue or black felt-tip pen, Pre-printed marks
Interface/Baud Rate RS-232c asynchronous (PC Serial) 300-38400 Baud
Microprocessor Motorola 68HC11
OMR Status/Version Dynamically request an 8 bit status byte or EPROM version from the OMR
Data Flow Control Utilizes XON/XOFF to control the flow of data from
the OMR to the application program
Data Output Binary ASCII Values
Form Marking (Infrared Model Option) #2 Pencil, Pre-printed marks
Timing Track Selection Select Top (right) / Bottom (left) for the location of the timing track
Timing Track Alignment In-Line (data mark area between leading and trailing edge of timing mark
Dimensions 5.28 inches wide x 2.394 inches high x 5.284 inches long
134.21 mm wide x 82.93 mm high x 134.21 mm long
Power Universal power adapter
100 – 240 VAC 47 – 63 Hz
Operating Conditions 41 degrees to 113 degrees Fahrenheit
5 degrees to 45 degrees Centigrade
30% to 80% humidity, non-condensing
Weight 2.5 lbs (1.1kg) – Shipping Weight 3 lbs (1.4kg)
Certification UL, FCC, CE, TUV for OMR and power adapter