For Sale STRYKER Stryker 1061 OBGyn Gynnie Stretcher Stretcher Parts P/N 1061−40−10

About This Item
Actual item from lot is shown. Used pulled, inspected thoroughly. Only what is shown is included. Guaranteed functional and guaranteed for 30 days.

Know What You are Buying

We typically take the time to post actual pictures of the unit you are buying
We also typically take the time to thoroughly test the units we are selling
Buy with CONFIDENCE from a reputable seller with 20 Years experience

DESCRIPTION

Manufacturer - Stryker
Part # 1061−40−10
 
Our parts are in-stock! Ships from our warehouse immediately. Removed from tested machine (see pics) & working properly before parts harvest. This is a fully tested part. Each machine has 1 unit

Complete foot section with gas cylinder strut shocks, release mechanism, hinges – all in fully serviceable condition and ready to install

Other numbers – 10614010

Includes the following subparts - 

A 721−40−26 Foot Board Receptacle 2

B 946−1−155 Bumper 6

C 1061−40−18 Foot Section Bumper 1

D 1061−40−19 Foot Section Pivot Cap 2

E 1061−40−20 Foot Section Weldment 1

F 1061−40−30 Ft. Section Release Bar Wldmt. 1

G 1210−201−550 Skid 2

H 1210−201−671 Dampener 2

J 3000−300−99 Modified Bushing 4

K 14−3 Washer 6

L 16−3 Hex Nut 2

M 16−28 Conelock Nut 2

N 25−40 Blind Rivet 6

O 26−118 Spring Pin 2

P 26−12 Spring Pin 2

Q 28−23 External Snap Ring 2

R 38−355 Extension Spring 2

S 3−78 Hex Hd. Cap Screw 2

T 4−222 Soc. But. Hd. Cap Screw 2

U 52−312 Foot Section Pivot Bearing 4

V 8−49 Socket Hd. Shoulder Bolt 2

W 1040−6−171 Foot Section Latch Roller 2

X 25−132 Flange Rivet 4

Y 1061−700−40 “Do Not Sit” Label 2

AA 29−3 Eyelet 2

AB 37−74 Hole Plug 2

AC 26−377 Clevis Pin 2

AD 81−634 Needle Bearing 2

 

Return Policy

5 Day Return Policy. Free Return. If you receive an item that it not as described, you MUST contact us by email within 5 days to explain the situation. Please provide as much detail as possible and include pictures if you can. We will return email an authorization. You MUST get the return to us within 10 days of the authorization in order to be accepted. NO returns will be accepted unless authorized in advance and the incoming parcel has the approved RMA number clearly marked on the exterior of the package. See above. All shipping is at customer expense. All authorized returns must be sent to us via UPS or FedEX as USPS does NOT deliver to our address and will return them to the sender. If the item you are returning is not defective, and you simply don't want it, this is referred to as a 'convenience return' and there will be a restocking cost of 25% to cover the time, labor, inventory work, sales effort and so on. Please keep this in mind before you purchase an item. NOTE - some items are NOT returnable. This will include electronic boards, memory and related components that have been installed but have not been agreed to be defective. It is expected customer will contact us to report electronic component failures and that a troubleshooting process will ensue in which our personnel will govern procedure to confirm or deny component failure. If this has not occurred, there is no case in which we will assume financial responsibility for electrical part or components.