MPN: SC3-17-04
~ ~ Call/Text or whatsapp: This Ferrite Microwave Technologies S-Band Waveguide Microwave circulator looks brand new with no sign of wear or damage. We don't have a clue what it was purchased for or the intended use. What you see here is what you will be buying. I was able to find some information on the internet and I have included it below. Guaranteed not to be DOA. SpecificsModel No; SC3-71-04Varian P/N: 829709-06 REV USerial No: H4974Designs: 3-Port & 4-PortCoaxial: Type N to 14-inchWaveguide: WR28 to WR2300Power Levels: 5 W to well over 50 MWFrequency Ranges: 50 MHz to 50 GHzFrequencies Supported: UHF, L, S, C, X, Ku, K, & Ka BandsAct as one way valves for energyProtect RF power sources from reflected powerDirect reflections away from the power source, usually into a dummy load
Ferrite Microwave Technologies Circulator SC3-71-04 S-Band Waveguide 4 Port
Ferrite Microwave Technologies Circulator SC3-71-04 S-Band Waveguide 4 Port
Click images to enlarge
Description
~ ~ Call/Text or whatsapp:
This Ferrite Microwave Technologies S-Band Waveguide Microwave circulator looks brand new with no sign of wear or damage. We don't have a clue what it was purchased for or the intended use. What you see here is what you will be buying. I was able to find some information on the internet and I have included it below. Guaranteed not to be DOA.
Specifics Model No; SC3-71-04
Varian P/N: 829709-06 REV U
Serial No: H4974
Designs: 3-Port & 4-Port
Coaxial: Type N to 14-inch
Waveguide: WR28 to WR2300
Power Levels: 5 W to well over 50 MW
Frequency Ranges: 50 MHz to 50 GHz
Frequencies Supported: UHF, L, S, C, X, Ku, K, & Ka Bands
Act as one way valves for energy
Protect RF power sources from reflected power
Direct reflections away from the power source, usually into a dummy load
Manufacturers Description
The Ferrite SC3-17-04 is a high-power microwave circulator, specifically designed for use in the S-Band frequency range. These circulators are typically used in applications such as weather radar systems, industrial processing, air traffic control radar systems, and scientific research.
Ferrite Microwave Technologies manufactures high power waveguide isolators in WR28 to WR2300 spanning the UHF, L, S, C, X, Ku, K & Ka Bands. In short, an isolator is essentially a microwave circulator with a load attached. Their main purpose is to act as one way valves for energy. In addition, isolators protect RF power sources from reflected power.
High Power Microwave Components & Systems
When failure isnt an option, our high power components provide you with unique capabilities in protection and detection.
Load VSWR (Output mismatch)
The design and power handling capability of a circulator is ultimately determined by the sum of the forward and reflected power, the latter being the result of any mismatch present at the output of the device. As an example, a device operating at 5,000W forward with an output mismatch of 2:1 (11%) must be capable of handling 5,550W. The same device operating into a short or open circuit must be capable of handling 10,000W.
Power - Peak & Average
The peak power capability of a circulator is dependent on the dielectric properties and gas pressure within the system and geometry of the components within the device itself. The average power dissipated in a circulator is proportional to the insertion loss and the greatest contribution to insertion loss is the ferrite material selected for use. Insertion loss results in heating of the ferrite which can impact performance if not mitigated. This heating can also impact the biasing magnets, increasing the complexity involved in maintaining a stable environment.
MTs circulator and isolator solutions place emphasis on the selection and bias point of ferrite material to minimize insertion loss and maximize isolation at the frequency, bandwidth and power level of interest.
Condition & Testing
Looks like new with no visible sign of wear or damage. No testing possible. Guaranted not to be DOA
Age
Unknown. I see this device is a current model on the Ferrite website.
Dimensions:
Overall Dimensions: 24" wide x 10" deep x 12" tall
Port openings: 1 1/4" x 2 3/4"
Warranty
I stand behind everything I sell and for 30 days I guarantee thisFerrite Microwave Technologies Waveguide S-Band Microwave Circulator is exact to the description and pictures i have provided here or return it for a refund.
Shipping
Weight before packing is 34 lbs for everything pictured
All buyers may use the shipping calculator
Pickup is always welcome from our warehouse in Coolidge Az (40 miles south of Phoenix Az near I-10)
If the shipping calculator wont give you a shipping cost you must contact me for a shipping quote.
_____________________________________
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment.. The purchaser, indicates their acknowledgment of, and agreement to the terms of this disclaimer. There are no warranties which extend beyond the description on the face hereof. This item has been cleaned and handled in accordance with the manufacturer's instructions..
, , Coolidge Arizona,Used equipment sales,
Pictures sell!
Auctiva offers Free Image Hosting and Editing.300+ Listing Templates!
Auctiva gets you noticed!
The complete Selling Solution.
Track Page Views With
Auctiva's Counter
Return Policy
Get a CPS 2-Year Protection Plan starting at $5.99. Sold separately. Learn more
