Get a CPS 2-Year Protection Plan starting at $5.99. Sold separately. Learn more
Seller assumes all responsibility for this listing..
Listing: #5649460
Includes:
-One HS 602 Rotary Vane Pump with Varian 949-9392 oil exhaust filter NW25
Features:
Dual stage design allows low 10-3 mbar operation, low operating temperature, minimal backstreaming at low pressure, good pumping efficiency and gas ballast in the low 10-2 mbar region
Worldwide motors available as 1-phase or 3-phase, are suitable for all voltages and frequencies worldwide. Operational voltages are easily selectable, allowing greater flexibility, easy planning and inventory reduction
The antibackstream valve and vent device isolates the pump should it stop or be idle, it also prevents inadequate venting and oil contamination of the vacuum system when the pump is switched off, or in case of power fail
Socket type IEC320 permits use of standard power cable and eliminates the need to open box and wire the motor
Gas ballast valve when opened injects dry air into the second stage of the pump, this action increases the temperature of the module which facilitates the outgassing and clean up of water vapor or other condensable gases from the oil
Shipped without a power cord, to be ordered separately
Specifications:
Dimensions (WxHxL)
164 mm x 242 mm x 541 mm
Exhaust Connection
25KF DN
Free Air Displacement
50 Hz: 504 L/min
60 Hz: 605 L/min
50 Hz: 30.2 m/h
60 Hz: 21.4 cfm
Height
242 mm
Inlet Connection
25KF DN
Input Voltage
1 phase motors 100-120/200-230V 10%, 50/60 Hz
3 phase motors 200-220/380-415V 10% at 50 Hz
3 phase motors 200-230/460V 10% at 60 Hz
Length
541 mm
Oil Capacity Min/Max
0.5 / 1 l
Pumping Speed (50 Hz)
25 m3h
Pumping Speed (60 Hz)
17.6 cfm
Rotational Speed at 50Hz
1500 rpm
Ultimate Partial Pressure
10-4 mbar
Ultimate Total Pressure with Gas Ballast
210-2 mbar
Water Vapour Pumping Capacity
550 g/h
Water Vapour Tolerance
30 mbar
Weight
35 kg
Width
164 mm
Refurbishment Protocol:
Our technicians decontaminate and clean equipment upon arrival at our facility and upon your purchase to create a neutral environment for your lab use.
Preliminary testing is then conducted on our equipment to identify potential defects. Upon completion, we replace all faulty and/or under-performing parts with original manufacturer parts that perform up to specification.
Any parts known to fail or malfunction on the piece of equipment are removed and replaced to insure the extended lifetime of your equipment.
Any necessary preventative maintenance is performed alongside repairs, so your purchase will be ready to go as soon as it arrives.
All of the electronics and boards are tested for proper function and response by our industry trained technicians. Any electronic deficiencies detected are immediately repaired.
Final testing cycles ensure your equipment performs fully at manufacturer specifications, guaranteeing you receive a properly working product ready for use.
Once we finish our rigorous testing and decontamination procedures, your order will be packaged to best protect it during shipment and may include delivery insurance depending on value.
* Free 30 day Returns
* Free Same Business Day Shipping
* Top Rated Plus Product
* This product is available also in different quantities and cases please ask us for details
- Call or email with your questions , Hablamos Espaol
- Ship from: IDE - Southern California. Global Shipping
- Details of item must be read carefully before buying and /or requesting return
Disclaimer:
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
