Data sheet Siemens X ray tube
April 01, 2021 10:42
I need the data sheet (and if it's high or normal speed)for
Siemens X ray tube:
Pls its urgent.
Thanks in advance
to rate and post a comment
re: Data sheet Siemens X ray tube
April 02, 2021 11:02
Its an old tube, i has a very high heating-current. These tubes worket with polymat50 an polydoros SX/LX. So i think highspeed. but i dont have a datasheet. Igor
re: re: Data sheet Siemens X ray tube
April 05, 2021 11:50
Thanks for your help
April 02, 2021 11:03
It depends on how you jumper it and what phase shift capacitor you use. Normally the tube is used in a high speed starter application. But you can change the jumpering and switch your phase shift capacitor if you intend on using it in non-high speed application.
You can go to Interay or Varian for tube data charts for any tube.
I haven't found the data sheet ,would you,kindly, send the modefication(there is no any data on the tubehead)
If you know the max. mA for that tube,I would be very grateful if you send.
April 02, 2021 11:04
Bi 150/30/50 R
April 09, 2021 01:38
Hi the tube letter R is Rapid, this tube have three phase stator and high velocity is 150Hz o 180Hz
This tube have a label stator side for jump for 150Hz or 50Hz
This tube comes with Tridoros 5S siemens, After BI (biangulix) the tube is OPTI
If you want replace this tube, you can use OPTI 150/30/50C 100L
April 06, 2021 10:36
Just go to Interay or Varex for the tube data, as for jumpering there will not be any documentation on jumpering, you just have to figure it out.
I can look to see what phase shift cap you need for low speed rotation. Not sure if I have a tube that will have the correct jumper configuration to look at.
I'll look through my Siemens archives to see if I have a tube book, might have thrown it out.
Tekyard Medical closeout auctions take place on DOTmed.com. Bid today on 343 lots of medical equipment. Onsite or virtual inspection available. Please email at email@example.com for an appointment.