Ip Address Setting In Agfa Drystar 2000 Printer - Service Technicians Forum

IP Address setting in Agfa DryStar 2000 printer

Tags: Laser and Dry Cameras, AGFA

(54)
(7)
(6)

Luis Diaz

IP Address setting in Agfa DryStar 2000 printer

March 01, 2014 08:05

Hello,
I have one printer DRYSTAR 2000 by Agfa. It work in dicom network, but now I need chage it the IP Address.
I not have service and config manual, anybody can help my with procedure or will sent to my copy of service and configurations manual?
Thank in advance.
Luis

1 person liked this
Log inor Register

to rate and post a comment

(75)
(19)

CARLOS RUEDA

re: IP Address setting in Agfa DryStar 2000 printer

March 03, 2014 08:57

Hi Luis you need the Imos software to get access at the printer. If you prefer I can help you remotely. IMOS Software should be installed on your laptop or some PC with serial port. I got the Imos SW.
regards

1 person liked this
Log inor Register

to rate and post a comment

(54)
(7)
(6)

Luis Diaz

re: re: IP Address setting in Agfa DryStar 2000 printer

March 03, 2014 09:11

Hello Carlos,
Thank for your reply and help.
I know that IMOS is for Drystar 3000 config, it is same for Drystar 2000?...you can sent to my copy of IMOS SW (my email is luisdiazpy@gmail.com?
I hope your comments,
Thank you
Luis

Log inor Register

to rate and post a comment

(17)

Service

re: re: re: IP Address setting in Agfa DryStar 2000 printer

March 14, 2014 01:06

Dear friend
I know that IMOS is for Drystar 3000 config, it not is same for Drystar 2000

serviceengineer@gmx.de

best regard

Log inor Register

to rate and post a comment

(54)
(7)
(6)

Luis Diaz

re: re: re: re: IP Address setting in Agfa DryStar 2000 printer

March 17, 2014 08:51

Dear,
Ok, I understand....maybe you know how chage the IP address in the DRYSTAR 2000, that it work wich dicom options?...my email is luisdiazpy@gmail.com....thank in advance

Log inor Register

to rate and post a comment

egor dementev

re: IP Address setting in Agfa DryStar 2000 printer

March 14, 2014 06:14

hi, if you still need IMOS for DRYSTAR 2000? i can send

Log inor Register

to rate and post a comment

(54)
(7)
(6)

Luis Diaz

re: re: IP Address setting in Agfa DryStar 2000 printer

March 18, 2014 09:25

Dear,
If you can sent to my IMOS Sw, I will be very grateful....my email is luisdiazpy@gmail.com
Thank in advance

Log inor Register

to rate and post a comment

(27)
(2)

Gencho Vasilev

re: re: re: IP Address setting in Agfa DryStar 2000 printer

March 23, 2015 02:29

Dear Luis Dias,
Please if you have Imos SW for drystar2000 send it to me.
Thanks

Log inor Register

to rate and post a comment

(90)
(10)
(13)

Irfan Malik

re: re: IP Address setting in Agfa DryStar 2000 printer

May 24, 2014 09:45

Dear Egor Dementev,
Please send me IMOS for 2000,i will be great full,my email is valleymedical786@gmail.com

Log inor Register

to rate and post a comment

(27)
(2)

Gencho Vasilev

re: re: IP Address setting in Agfa DryStar 2000 printer

March 26, 2015 09:37

Please if you have Imos SW for drystar2000 send it to me.
Thanks

Log inor Register

to rate and post a comment

(4)

carlos urroz

re: re: IP Address setting in Agfa DryStar 2000 printer

October 28, 2015 08:56

Dear friend: I have an Agfa drystar 2000 printer which I purchased in Ebay. Plese tell me how to install in my PC, What I need to have to work properly to print panoramic X rays from a digital X ray device

Log inor Register

to rate and post a comment

(4)

carlos urroz

re: IP Address setting in Agfa DryStar 2000 printer

October 28, 2015 08:56

I need to install an Agfa drystar 2000 in my pc and I don't know how to doit

Log inor Register

to rate and post a comment

(41)
(7)

CharlieWheel

re: re: IP Address setting in Agfa DryStar 2000 printer

October 28, 2015 01:53

Hello Luis.

You need to check if your Modality (Panoramic RX) has Dicom print license.
If your modality its OK with Dicom Print, then configure the Network IP Address on your local machine (Panoramic PC's) set the Ip Address then open your panoramic Application and configure the same local IP add. on DICOM NETWORK, on this application you have to configure the DICOM PRINT. I.E. IP Address: 89.0.2.1 Port:104 Alias:DRYS2K.
Configure the way you want to print; blue film, clear film, opaque film and the film size.

On Drystar side: Install IMOS SW on your Lap.
Connect the serial cable between LAP and Printer
Execute the Imos Drystar2000, maybe you nedd to configure the serial velocity and parity. 9600,8.1
Follow the intructions on the Imos SW to set DICOM properties, AETITLE, PORT, ALIAS, NETWORK IP.


Below you will find a Imos SW link.

If you have questions, let me know.

Regards!

https://drive.google.com/open?id=0Bx-UtDeQ0kGMbDladWtxQVBudTg



Log inor Register

to rate and post a comment

(54)
(7)
(6)

Luis Diaz

re: re: re: IP Address setting in Agfa DryStar 2000 printer

October 28, 2015 05:13

Hi,
Thank you for help me...you can give me access for intro in the link for download the IMOS?..
..you have the pinout the serial cable for connect the PC to Drystar2000?
Thank you in advance

Log inor Register

to rate and post a comment

(4)

carlos urroz

re: re: re: IP Address setting in Agfa DryStar 2000 printer

October 29, 2015 12:04

Thank you very much. I will try and let you know my advances. Since I am a dentist my knowledge about this matter is limitated, but I will get som help and let you know.
Thank you again.
Best regards.

Log inor Register

to rate and post a comment

(4)

carlos urroz

re: re: re: IP Address setting in Agfa DryStar 2000 printer

October 29, 2015 12:05

My PC does not recognize the printer. I am using a serial cable db 25 male to db 9 female. It's that correct?

Log inor Register

to rate and post a comment

(75)
(19)

CARLOS RUEDA

re: re: re: re: IP Address setting in Agfa DryStar 2000 printer

October 29, 2015 09:00

Ley me check and tomorrow I will send you a screen shoot with the drystar configuration.

Log inor Register

to rate and post a comment

(75)
(19)

CARLOS RUEDA

re: re: IP Address setting in Agfa DryStar 2000 printer

October 29, 2015 12:04

See my post below.... Regards...

Log inor Register

to rate and post a comment

(9)

Aisseke

re: IP Address setting in Agfa DryStar 2000 printer

January 09, 2020 09:12

Hi! Please my question not related to your question, but which type of film do you use with the DS2000?

Log inor Register

to rate and post a comment

Nationwide Service & Support 1-866-NUC-MED1

OEM trained nationwide service for NM, PET, PET/CT systems. Relocation, installation, parts, technical and clinical support. info@nis-mit.com

advertisement

 

advertisement

 

advertisement

 

 

advertisement