I need to replace older CRT monitors on PICKER PQ5000, IQs & VoxelQ with LCD monitors. If anyone can recomend me any model that work on these systems please let me know. I appreciate your advise. Thanks.
HI any brand or model in particular? does it have to be medical grade monitor? do i need any device? the picker pq series works with BNC (red,green,blue) monitors
Depends on your software version, mostly you should be able to utilize a Philips 180P2M/74J Brilliance 180P2, 18-inch LCD flat panel monitor. This monitor is made by Viewsonic for Philips Medical Systems. It replaces the CRT monitors on the PQ5000 CT Scanner and the VoxelQ Workstation.
Remember noone digital monitor has the definition of an analogic crt. Indeed you need to use hi quality flat monitors.
I did it some month ago and used NEC LCD2080UX+BK. I can note a lighly difference between this one and the oldone, But the doctors and technician said it's marvelous. You can use it or similars.
JM
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Dionicio Duran
LCD Monitors for PICKER PQ5000 Scanner
August 15, 2004 06:20
I need to replace older CRT monitors on PICKER PQ5000, IQs & VoxelQ with LCD monitors. If anyone can recomend me any model that work on these systems please let me know. I appreciate your advise. Thanks.
to rate and post a comment
Dave Adams
Re: LCD Monitors for PICKER PQ5000 Scanner
August 15, 2004 08:15
Dear Dion,
It must be a "Sync on green" monitor, that is all you need be sure of.
Regards, Dave
to rate and post a comment
Blanca Parciak
Re: LCD Monitors for PICKER PQ5000 Scanner
October 29, 2006 10:45
HI any brand or model in particular? does it have to be medical grade monitor? do i need any device? the picker pq series works with BNC (red,green,blue) monitors
thks
to rate and post a comment
Edward Yan
Re: LCD Monitors for PICKER PQ5000 Scanner
October 30, 2006 04:11
Depends on your software version, mostly you should be able to utilize a Philips 180P2M/74J Brilliance 180P2, 18-inch LCD flat panel monitor. This monitor is made by Viewsonic for Philips Medical Systems. It replaces the CRT monitors on the PQ5000 CT Scanner and the VoxelQ Workstation.
Edward Yan, B.S.E.E.
to rate and post a comment
Jose Morillo
Re: LCD Monitors for PICKER PQ5000 Scanner
October 30, 2006 07:32
Remember noone digital monitor has the definition of an analogic crt. Indeed you need to use hi quality flat monitors.
I did it some month ago and used NEC LCD2080UX+BK. I can note a lighly difference between this one and the oldone, But the doctors and technician said it's marvelous. You can use it or similars.
JM
to rate and post a comment