Altima will inspire the trust, loyalty and commitment of our customers through positive relationships and collaboration, top quality equipment services, and a clearly superior value proposition. Call Today (469) 644-7063
Doug Steers
September 08, 2008 09:27
Hodwy folks Doug Steers here and no Im not dead Im back at work I need to reprogram a Siemens Mammomat 3000 system to run at 49kV max instead of 3...
Ricardo Delmonte
November 07, 2008 09:59
When scanning the unit stops and the sreen reads XG ERROR 117 together with the number 532 When I look for that error at the user manual it mentions ...
Dorin Jighira
August 21, 2008 07:21
Im in great need for any documentations referring to Topcon RM-A5000 autorefractometer especially some regarding to optical head calibration and the...
Randy Anderson
February 03, 2016 05:22
I already have a copy of the error codes from a previous entry but I cant find a listing for the start up tests I have a failed test 4 on start-up I...
Dorin Jighira
August 04, 2008 07:57
I need urgent please Is there anyone who can help me for Topcon RM-A5000 documentation Im in great need for calibration procedure especially Man...
Medilab Global provides high-quality pre-owned imaging equipment, parts, and service to the healthcare industry worldwide. Our number 1 position is to provide excellent customer service.. 305-234-0084 | Email: info@medilabglobal.com | Hablamos Español
Roberto Villalba
July 31, 2008 11:42
I have a Philips 05T Q neck coil with a low sn Can the coil be calibrated ...
Johnny Barreto
July 31, 2008 09:45
Does Anybody know where I can get the calibration software which usually comes on floppies of the GE Prestilix 1600X X-Ray generator system ...
Michael Groves
December 12, 2012 09:11
Anyone have a service manual for the IVAC 4200 Vital Check The blood pressure readings are inaccurate I think it needs to be calibrated Thanks...
Mario Silva
November 27, 2017 09:30
I need to adjust the Servo amp board because the Ct doesnt take the home position In the manual doesnt figure that configuration Thanks...
Tim Austin
July 15, 2008 11:43
I have a lorad m-iv that is getting a system 35 error message with very small breasts I went through the filament calibration and thought that took ca...
Adepto Medical is an infusion pump rental, sales, and service company. Our focus is to deliver to our customers the best product and customer service support we can offer. Call (913) 261-9933
Abdula Saeed El Shafeey
March 02, 2013 09:11
The scan frame starts to rotate about half turn 180 degree then it stops and the drives led goes off I swapped most of the gantry cardfile boards...
Ed Ramirez
August 15, 2008 01:53
I HAVE A LFX SYSTEM WHICH WAS REMOVED IN WORKING CONDITION UPON REINSTALLATION WE TRY TO GO THRU CALIBRATION SEQUENCE WITH NO SUCCESS WE CHECKED KV V...
Roberto Villalba
June 13, 2008 11:12
I need to install the x-ray tube in this CT Somebody knows the password of the service program If it is necessary Thank you ...
Salman Mayo
June 03, 2008 08:56
HI I am facing some error in my lifepak9P defebrillator SERVICE when i charge it the error ENERGY FAULT SHOWS THE ERROE codes showing by defe...
AMX 4 Test Failure
Dan Peddycord
October 07, 2008 04:11
Have AMX 4 with error At turn on I get Test 1 test 2 failure test 3 failure Then display goes blank I found one bad battery at 5 v charged on tric...