MIT labs, experts in Multi-Vendor component level repair of: MRI Coils, RF amplifiers, Gradient Amplifiers Contrast Media Injectors. System repairs, sub-assembly repairs, component level repairs, refurbish/calibrate. info@mitlabsusa.com/+1 (305) 470-8013
ACUSO X300 Image Initialization Failed
April 27, 2013 10:15
Hi every one
I really need to fix a problem in this system . "Image Initialization Failed " message is on screen on swiching system on .
Kindly help .
to rate and post a comment
mohamed elgenidy
re: ACUSO X300 Image Initialization Failed
April 27, 2013 08:00
open the side cover "from the printer side",and remove the three boards "RC,TX,BE" and clean them using electronics spray,and after they r dry,u can reinstall them,and try the machine.
to rate and post a comment
Galal Hamood
re: re: ACUSO X300 Image Initialization Failed
April 28, 2013 10:26
Hello Mohamed
In fact the problem appeared when the electricity cut down suddenly while the machine operating. Then we reinstall the software and then that message disapeared foe another message to came up "upgrading"
Now on swiching machine on , this new message appeare on screen and stays.
to rate and post a comment
Pav35
re: ACUSO X300 Image Initialization Failed
April 27, 2013 08:01
email me at povtor@rambler.ru
to rate and post a comment