In the first time that I turn On the machine after a long time
the equipment off, appears the message:
POWER UP ERROR
PROMLOAD 03
DPR 80
After this appears the message: "Press the key to continue"
When I press the key appears on monitor the date, hour and a
small white box.
In the second time that I turn on the machine dont appears
any message. Just appears on monitor the date, hour and a small
white box.
After some tests turning on and turning off began to appear the
message: "transducer not allowed please desconect one
trasnducer"...but after other tests the message dont appears
again.
Whats board can to be responsable fot this defect?
Whats is this error on initialize?
Do you think if I change the CVC board the problem will solve?
All problems or some problems?
I 'm asking this for you because the machine is in other state with my customer and I will go to over there for solve the problem.
Thanks in advanced;
I have a CVC board and I will change the CVC board, but I dont know how to input the strings. Whats the procedure for this? where I find the strings?
thanks in advanced,
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
Raphael Cortez
ACUSON 128XP Problem - Please help me!
September 20, 2007 05:21
Dear Friend,
In the first time that I turn On the machine after a long time
the equipment off, appears the message:
POWER UP ERROR
PROMLOAD 03
DPR 80
After this appears the message: "Press the key to continue"
When I press the key appears on monitor the date, hour and a
small white box.
In the second time that I turn on the machine dont appears
any message. Just appears on monitor the date, hour and a small
white box.
After some tests turning on and turning off began to appear the
message: "transducer not allowed please desconect one
trasnducer"...but after other tests the message dont appears
again.
Whats board can to be responsable fot this defect?
Whats is this error on initialize?
Thanks in advanced
to rate and post a comment
Emerson Freire
Re: ACUSON 128XP Problem - Please help me!
September 20, 2007 09:18
You have a problem on the scan converter CVC board. Probably two falty batteries.
to rate and post a comment
Raphael Cortez
Re: ACUSON 128XP Problem - Please help me!
September 21, 2007 09:35
Hello my friend,
Do you think if I change the CVC board the problem will solve?
All problems or some problems?
I 'm asking this for you because the machine is in other state with my customer and I will go to over there for solve the problem.
Thanks in advanced;
msn: signalmed_equipamentos@hotmail.com
SKYPE: signalmed_engenharia
thanks a lot
Raphael
to rate and post a comment
Raphael Cortez
Re: ACUSON 128XP Problem - Please help me!
September 21, 2007 02:33
One more question.
When the battery is failed the hour and data is lost too? or just the strings is lost?
Thanks.
to rate and post a comment
Ines Gruender
Re: ACUSON 128XP Problem - Please help me!
September 21, 2007 03:54
I think you need to change the battery and then renter the Password Strings for installed options.
to rate and post a comment
Raphael Cortez
Re: ACUSON 128XP Problem - Please help me!
September 21, 2007 02:30
Hi friend,
I have a CVC board and I will change the CVC board, but I dont know how to input the strings. Whats the procedure for this? where I find the strings?
thanks in advanced,
Bye
to rate and post a comment