hello
can you help me please this my problem
when I turn on the unit, there is a strong fan noise, after some munites on the screen we see the menu user maintenance tools and you see again in this same menu this word SYSTEM ERROR (0-0-1)
help me to find the failure my email namayves@gmail.com
Pic2 board does not require third party service enabled so if you have pic1 and removed shield to boards you might reset system. Could be power supply too
there is a sensor for the board cover on the pic board that could be the problem. Also make sure your filters are not clogged up creating a quick heat issue.
GBS offers service, repair, rentals & spare parts for your ventilators. With over 40 years of experience our certified & factory-trained biomedical technicians refurbish all our used ventilators. Call today 800.558.9449
yves nama
acuson c256 system error
July 11, 2014 08:36
hello
can you help me please this my problem
when I turn on the unit, there is a strong fan noise, after some munites on the screen we see the menu user maintenance tools and you see again in this same menu this word SYSTEM ERROR (0-0-1)
help me to find the failure my email namayves@gmail.com
to rate and post a comment
Miguel Rivera
re: acuson c256 system error
July 12, 2014 11:58
This is the security.Verify good connections the side panels
to rate and post a comment
mohamed elgenidy
re: acuson c256 system error
July 12, 2014 11:59
it seems that u opened the boards cover.right?
to rate and post a comment
Brian Seltzer
re: re: acuson c256 system error
July 13, 2014 12:32
Pic2 board does not require third party service enabled so if you have pic1 and removed shield to boards you might reset system. Could be power supply too
to rate and post a comment
yves nama
re: re: acuson c256 system error
July 14, 2014 09:01
no the cover is closed
to rate and post a comment
Alex Kalish
re: acuson c256 system error
July 12, 2014 11:59
Check the magnetic switch on the access cover that's on the right hand side. The madnet will be attached to a nylon screw
to rate and post a comment
Brian Seltzer
re: acuson c256 system error
July 12, 2014 11:59
I had the exact problem about a month ago. It turned out to be the motherboard. Does the system have a PIC1 or PIC2?
to rate and post a comment
Brian Seltzer
re: acuson c256 system error
July 12, 2014 11:59
I had the exact problem about a month ago. It turned out to be the motherboard. Does the system have a PIC1 or PIC2?
to rate and post a comment
yves nama
re: re: acuson c256 system error
July 14, 2014 09:01
Dear can you give the service manual please
to rate and post a comment
Zach Ruder
re: acuson c256 system error
July 14, 2014 05:59
there is a sensor for the board cover on the pic board that could be the problem. Also make sure your filters are not clogged up creating a quick heat issue.
to rate and post a comment
yves nama
re: re: acuson c256 system error
July 15, 2014 10:13
thank you very much, can you give me the full explanation of pic also i need service manual
to rate and post a comment
Rey Gonzalez
re: acuson c256 system error
July 15, 2014 10:11
contact me rey@allultrasoundservices.com
to rate and post a comment