Harkesh, the ADAC software is looking for a specific scsi id when loading software or options. The id would be the same as the cdrom drive. To determine the scsi id you shutown and at the ok prompt you type show-scsi and it will show you the cdrom's id. you then remove the cdrom and put your other device in its place. I believe the id is set to 6. You can call American Allied Nuclear, Inc. and our support is free.
Lee Kelly
866-782-2687
One call to 440-263-6575 and your move will be covered.
We repair & store trailers. We build to your custom needs.
JDI Mobile Medical Manufacturing. Inc. We have your back.
Harkesh Singh
ADAC Dual Head Pegasys problem
May 11, 2007 08:05
We have ADAC Dual Head Gamma Camera with Pegasys Software Version 3.4
We are trying to load Cedars AutoSPECT option using Toshiba CD ROM Drive.
I have tried the drive ID at 0, 1,2 and 5. It does not work. The Tape and HD are ID at 3 and 4.
Can some one help
Thank you in advance
Harkesh Singh
917 856 5211
info@ahtiny.com
to rate and post a comment
JIFFY PAUL AKKARAKARAN
Re: ADAC Dual Head Pegasys problem
May 11, 2007 04:12
Hi,
Have you checked the SCSI termination setting? Check to which device the termination is made active.
Jiffy Paul
to rate and post a comment
Lee Kelly
Re: ADAC Dual Head Pegasys problem
May 13, 2007 07:53
Harkesh, the ADAC software is looking for a specific scsi id when loading software or options. The id would be the same as the cdrom drive. To determine the scsi id you shutown and at the ok prompt you type show-scsi and it will show you the cdrom's id. you then remove the cdrom and put your other device in its place. I believe the id is set to 6. You can call American Allied Nuclear, Inc. and our support is free.
Lee Kelly
866-782-2687
to rate and post a comment
Harkesh Singh
Re: ADAC Dual Head Pegasys problem
May 14, 2007 11:40
Lee, Thank you. It worked at ID 6. I was able to load the software.
I will call you today to spaek with you.
Thank you
Harkesh Singh 917 856 5211
to rate and post a comment