Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.
adc solo
August 29, 2012 11:02
hello every body
i have problem with ADC Solo. the screen is no show. i connect my laptop with hyperterminal ,i can't boot to hd , the power supply 5v and 12v hd is ok, i change HD but is the same.??? maybe i have problem with Gemini board ! do you have somes idees , and it is possible to replace Gemini board ( v4) with gemini V1 of MG300 (v&) ???
thanks in advance
to rate and post a comment
juan pablo amado
re: adc solo
August 30, 2012 02:44
Do you have cpu dialog by hyperterminal? Try booting with portex1 floppy
to rate and post a comment
roger dussart
re: re: adc solo
August 30, 2012 06:13
YES I HAVE DIALOG WITH CPU FROM HYPERTERMINAL? BUT IS NOT POSSIBLE TO BOOTING TO hd SAME FOR fd. I DONT HAVE PORTEX FLOPPY? JUST FD FORMAT AND 3 FD SOFTWARE SOL2101. I BELEVE PORTRX IS FOR CR25 ???? tHANK YOU JUAN FOR YOUR HELP.
to rate and post a comment
roger dussart
re: re: adc solo
August 30, 2012 06:13
JUAN , SO IN MY HOME I DON'T HAVE UNIT ADC SOLO? I TRY TO LOADING SOFTWARE IN NEW HD FROM MG300? NO BOOT TO HD? ??? I DON'T UNDERSTAND WHY IS NOT POSSIBLE ? THE FD IS RUNNING IN PROCEDURE BUT NOT SHOW TO HYPERTERMINAL FOR WRIIT TO HD.
MY EMAIL IS rdus0001@yahoo.fr.
to rate and post a comment
TOM CHARLES
re: re: re: adc solo
August 31, 2012 10:21
HELLO ROGER can you please send me the hyper terminal text at tomcharles41@yahoo.com?
and one thing more on LCD of digitizer only green light is present and on upper left corner the text in BOLD in blinking?
And also note down the model manufac all the info present on digitizer and also send it to me?
to rate and post a comment