I´m an in-house engineer working on an Advantx-E LCA+ system, having trouble in the ASC module, the system doesn´t boot at all, failed HDD. I'm needing the Red Service CD so I can reload the software to my system, and, later on, can make service procedures. I only have the white basic service CD. The TITAN sw version is G4.07
Johnny, I have software for the Advantx-E Titan LFC. Load from cold procedure is valid for all Advantx-E systems. I can provide you with a hard drive already loaded and then you can use your white CD for system info, or I can send you the software by email with the procedure and see how that works for you. I also have the backpack CD kit mentioned if needed. I can be contacted for pricing and which option you prefer. Just let me know.
Thanks,
Hello my collegue,
I have a problem with one advantx e console-titan and need your help, I have the cd white with the service laptop tool, the installation wasn´t easy, because don´t run in winxp and run a winxp portable and I can install the software, but when I click in the icon program not run because need a vbrun300.dll library. CAN YOU HELP TO ME?
Perhaps you can help me with my difficult problem.
I'm having a difficult problem that I do not know how to solve with one Revolution XR/d TITAN ASC Assy.
It stops booting (INIT LED remains always on) for some reason and it is not the HDD because I had made a HDD copy (when the system was working properly); The symptom remains the same even after replacing the old HDD with the clone HDD.
I try to do the "xterm -sb &" and "tip titan" and it states "connected" but does not show me anything else; When I reset the TITAN with boot floppy in floppy drive and try to boot from floppy, it does not show any boot. I know for fact that this floppy is ok because I cloned the floppy when the system was installed and allways make a new one when I need. I wonder if the problem is the timekeeper ram that is on the CPU board? Can it be replaced on the field? How is the CPU board configured?
Looking for the leader in urology? BK Medical is and we are the 3rd party experts. We sell BK and many other brands. Call today to discuss your urology equipment needs and save $1,000’s! Call Today: 1-888-838-7488 Email: sales@sentinelimaging.net
Johnny Barreto
Advantx-E service CD
December 04, 2014 10:19
I´m an in-house engineer working on an Advantx-E LCA+ system, having trouble in the ASC module, the system doesn´t boot at all, failed HDD. I'm needing the Red Service CD so I can reload the software to my system, and, later on, can make service procedures. I only have the white basic service CD. The TITAN sw version is G4.07
Thanks in advance. Best regards
to rate and post a comment
Michael Fisher
re: Advantx-E service CD
December 07, 2014 12:06
Johnny, I have software for the Advantx-E Titan LFC. Load from cold procedure is valid for all Advantx-E systems. I can provide you with a hard drive already loaded and then you can use your white CD for system info, or I can send you the software by email with the procedure and see how that works for you. I also have the backpack CD kit mentioned if needed. I can be contacted for pricing and which option you prefer. Just let me know.
Thanks,
Mike Fisher
to rate and post a comment
Johnny Barreto
re: re: Advantx-E service CD
December 09, 2014 11:54
Thank you Mike. I'll contact you for more details
to rate and post a comment
mcxrayca
re: re: Advantx-E service CD
July 15, 2016 09:33
Hello my collegue,
I have a problem with one advantx e console-titan and need your help, I have the cd white with the service laptop tool, the installation wasn´t easy, because don´t run in winxp and run a winxp portable and I can install the software, but when I click in the icon program not run because need a vbrun300.dll library. CAN YOU HELP TO ME?
to rate and post a comment
Bogdan Maslii
re: re: re: Advantx-E service CD
August 19, 2016 09:34
Hi, I have this files. If you still need them, you are welcome, I will send them.
to rate and post a comment
Daniel Dinis
re: re: Advantx-E service CD
June 28, 2021 11:41
Dear Michael,
Perhaps you can help me with my difficult problem.
I'm having a difficult problem that I do not know how to solve with one Revolution XR/d TITAN ASC Assy.
It stops booting (INIT LED remains always on) for some reason and it is not the HDD because I had made a HDD copy (when the system was working properly); The symptom remains the same even after replacing the old HDD with the clone HDD.
I try to do the "xterm -sb &" and "tip titan" and it states "connected" but does not show me anything else; When I reset the TITAN with boot floppy in floppy drive and try to boot from floppy, it does not show any boot. I know for fact that this floppy is ok because I cloned the floppy when the system was installed and allways make a new one when I need. I wonder if the problem is the timekeeper ram that is on the CPU board? Can it be replaced on the field? How is the CPU board configured?
to rate and post a comment