Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.
Borislav Kecman
AGFA CR 25 workstation missing
June 08, 2015 01:06
Hello friends,
I recently bought an AGFA CR 25 system, and it came with CR user station but the PC was removed. Is there any option to buy a PC and to install a software on it? If so, does anyone have the software?
Best regards,
Boris
to rate and post a comment
Rebel Cook
re: AGFA CR 25 workstation missing
June 09, 2015 08:45
You have to have a dongle and lisence file for the software and it is tied to the Mac address of the computer. You will need to talk to agfa or an agfa dealer to buy the software and dongle.
to rate and post a comment
Syed Yousuf
re: AGFA CR 25 workstation missing
June 09, 2015 08:46
what kind of sw u need,,QS or NX
to rate and post a comment
Borislav Kecman
re: re: AGFA CR 25 workstation missing
June 09, 2015 04:38
I am not sure. To be honest I do not know the difference... This unit is from 2004. If zou have any suggestion, my email is kecman.borislav@gmail.com
to rate and post a comment
juan pablo amado
re: AGFA CR 25 workstation missing
June 09, 2015 04:37
You can use IQview software as Workstation, it hasn´t Musica or other Agfa propietary utilities, but can recipe, modify, send and print images fron CR
to rate and post a comment
Borislav Kecman
re: re: AGFA CR 25 workstation missing
June 10, 2015 07:33
Will it work with ID tablet? I have to identify a cassette to use it with CR 25, if I understood the principle right.
to rate and post a comment
juan pablo amado
re: re: re: AGFA CR 25 workstation missing
June 10, 2015 02:18
You can use in emergency mode, or by a simple soft running as a Prid
to rate and post a comment
Borislav Kecman
re: re: AGFA CR 25 workstation missing
July 01, 2015 03:35
I got IQ view, but it doesn`t communicate with cr 25. Can you help me with setting the communication right?
to rate and post a comment
juan pablo amado
re: re: re: AGFA CR 25 workstation missing
July 03, 2015 08:57
Check IP, AET, Port in Iqview config
1)read destination in CR25 (AET; IP)
2)put this destination as AET and IP in Iqview AET
if do not work send mail to me
to rate and post a comment
Borislav Kecman
re: re: re: re: AGFA CR 25 workstation missing
July 03, 2015 10:36
Please contact me on mz e-mail, because I do not have yours. Mz e-mail is kecman.borislav@gmail.com
to rate and post a comment
EFREN FRANCO
re: AGFA CR 25 workstation missing
June 09, 2015 04:37
You will need to get another PC with application installed and configure the system. It can be the older model QS or a newer model called NX.
to rate and post a comment