Over 150 Missouri Auctions End Tomorrow 06/05 - Bid Now

agfa cr 35 error

Tags: PACS / DR / CR / Digital

imad fettah

agfa cr 35 error

August 21, 2016 10:58

excuse me; i Need Some Help, an AGFA CR 35-x On The LCD shows nothing and it's a blue screen

Log inor Register

to rate and post a comment

(23)
(3)

Luis Espinoza

re: agfa cr 35 error

August 22, 2016 10:08

Usually it is a Software Error (Corrupts), reinstall Software. Or Maybe HDD Damaged

Log inor Register

to rate and post a comment

(16)
(3)
(7)

Haider Ali

re: agfa cr 35 error

August 22, 2016 10:09

which LCD on Digitizer or Computer LCD?

Log inor Register

to rate and post a comment

(5)

Samuel Nkansah

re: re: agfa cr 35 error

December 21, 2016 10:48

digitizer

Log inor Register

to rate and post a comment

(432)
(83)
(3)

juan pablo amado

re: agfa cr 35 error

August 22, 2016 10:09

More info!! please.
Open lower front door, push link sitch and see power supply leds
Open rigth hand cover and see leds in oberon board, shows activity?

Log inor Register

to rate and post a comment

(5)

Samuel Nkansah

re: re: agfa cr 35 error

December 21, 2016 10:48

All power indicators are lighting can you help me with the software thank you
nkansah2013@gmail.com

Log inor Register

to rate and post a comment

(82)
(19)

Uldis Verdins

re: agfa cr 35 error

August 22, 2016 10:13

Hi Imad Fettah!
Your CR35X system had problem with startup of CR35 Reader.
Propobly System on HDD is corruprt, poblem with CPU or brouken SCSI hard disk. You must check all. If SCSI HDD is OK You need to reinstall sytem. For this You need installation FDD set and site specific data backup FDD and procedure for Installation.
Good lock!

1 person liked this
Log inor Register

to rate and post a comment

(5)

Samuel Nkansah

re: re: agfa cr 35 error

December 21, 2016 10:48

Please I have same problem can I have the software you can contact me on nkansah2013@gmail.com thank you

Log inor Register

to rate and post a comment

(2681)
(673)
(21)

Lenny Place

re: agfa cr 35 error

August 22, 2016 10:14

Have you verified the power supplies? Hare you tried to boot from a floppy to see if it will access the floppy?

Log inor Register

to rate and post a comment

stats
DOTmed text ad

Your Trusted Source for Sony Medical Displays, Printers & More!

Ampronix, a Top Master Distributor for Sony Medical, provides Sales, Service & Exchanges for Sony Surgical Displays, Printers, & More. Rely on Us for Expert Support Tailored to Your Needs. Email info@ampronix.com or Call 949-273-8000 for Premier Pricing.

stats

Upcoming Auction Events

Cbrx2sales
TIMED
Jun 05, 2026 (157 lots)