AGFA drystar 5302 to clear a printer queue

You can only delete images as operator via remote acess, there is no other way.
Remote session is via Internet Explorer, you use as an adress the IP adress of DRYSTAR 5302.
Read the following page of the manual.

"Features
All functions that can be accessed via the local
keypad and display can also be accessed via a remote PC via the network.
Brief: LOCAL corresponds with MAIN features.
All functions that can be accessed via Remote connection are not necessarily available via the local keypad.
Brief: REMOTE corresponds with ALL features.
This remote access allows controlling multiple printers from a networked central PC.
The prerequisite for remote access is:
. A PC (Windows 2000 is advised),
. Browser software (preferably Microsoft Internet Explorer 6.0),
. A network adapter,
. A cross-link Ethernet cable (for a direct link between PC and
Drystar 5302) or a straight Ethernet cable (for a connection via an
existing network).
Using the remote PC, you have access to five operating modes of the
Drystar 5302: Operator mode, Key-operator mode, Service mode, Specialist
mode, and Administrator (Security).
Depending on the operating mode, you will need a password to have access:

Need password Local Remote
Operator No Yes
Key-operator No Yes
Service No access Yes
Specialist No access Yes
Administrator No access Yes

Entering the operator level
To enter the operator level, a password is required.
. User name: Operator
. Password: Operator
This level enables the operator to follow print jobs and perform common tasks.
Entering the Key-operator level
To enter the Key-operator level, click Key-operator tools and enter the
following user name and password:
. User name: Drystar
. Password: 5302
You now have access to the Drystar 5302 functions in the key-operator mode."
Good luck!