intermittent problems. the MR Ready light does not come on (usually). when this occurs, the table CPUI cannot be turned on using the table tool.
sometimes the MR Ready light does come on when the system is re booted. in that case, I get an I/O erro in the coil, 3a160d, FE manager, table.
It seems like the system cannot communcate with the table. I have checked all power supplies and cable connections, reseated all boards, checked fuses and circuit breakers.
this sytem is the 'older' design wiht the CPU next to the desk. The bit 3 card has a ready light illuminated.
Comprehensive medical imaging support. We supply essential parts & maintenance for most OEMs, buy/sell quality used equipment, and offer mobile rentals globally. Contact us: info@lasoimaging.com
Steven Ford
Airis 2 table power problem
July 24, 2012 10:40
Intermittently the mr ready light will not come on after booting the system. The table CPU power will not turn on, and the coil is not recognized.
Sometimes when re booting it works fine.
Any ideas? I have re seated all cables and checked all power supplies.
to rate and post a comment
Qurat Ul Ain
re: Airis 2 table power problem
July 25, 2012 02:56
At front side of MRI UNIT there are boards
Reinsert the boards and check the boards MRRCN/MRRCN2 & MRPSC BOARD.
WASEEM_HYDER2003@YAHOO.COM
to rate and post a comment
Qurat Ul Ain
re: Airis 2 table power problem
July 26, 2012 10:42
what is the error shown on the screen??
to rate and post a comment
Steven Ford
re: re: Airis 2 table power problem
July 27, 2012 09:42
intermittent problems. the MR Ready light does not come on (usually). when this occurs, the table CPUI cannot be turned on using the table tool.
sometimes the MR Ready light does come on when the system is re booted. in that case, I get an I/O erro in the coil, 3a160d, FE manager, table.
It seems like the system cannot communcate with the table. I have checked all power supplies and cable connections, reseated all boards, checked fuses and circuit breakers.
this sytem is the 'older' design wiht the CPU next to the desk. The bit 3 card has a ready light illuminated.
to rate and post a comment
wasiullah jan
re: re: re: Airis 2 table power problem
July 28, 2025 11:12
Please check your Fiber optical cable one side of this cable insert in your Magnet room table and the other is in cabinet side
to rate and post a comment