If the unit is giving a error code higher than the 400's than I would verify the power supplies on the CPU board check for ac noise also. The 680 is not within the normal rnage of error codes so it could be the CPU is giving a false code. If the supplies are good than I would replace the RAM chips and than perform a complete calibration. If you can not clear the 680 error replace the CPU
We supply high-quality refurbished and used imaging equipment and parts to hospitals, imaging centers, and brokers worldwide. We pay top dollar and offer installation, deinstallation, service, and transport. Se habla español info@medilabglobal.com
Alex abalis
amx4 mobile xray machine
January 10, 2013 10:04
what does 680 means on the display screen after refusing to turn ON?
to rate and post a comment
Lenny Place
re: amx4 mobile xray machine
January 10, 2013 05:29
I have never seen a error higher than the 400's is this a amx 4+?
to rate and post a comment
Kim Schofield
re: re: amx4 mobile xray machine
January 11, 2013 08:26
The highest possible error code is 469
to rate and post a comment
Lenny Place
re: amx4 mobile xray machine
January 11, 2013 05:49
If the unit is giving a error code higher than the 400's than I would verify the power supplies on the CPU board check for ac noise also. The 680 is not within the normal rnage of error codes so it could be the CPU is giving a false code. If the supplies are good than I would replace the RAM chips and than perform a complete calibration. If you can not clear the 680 error replace the CPU
to rate and post a comment