i have a aplio xv machine
when i copied the original 80 G WD HDD to a 160 G Seagate HDD the timing of the start up loading increasing with the seagate HDD ....
any one know why ??!
i tried another 160G seagate HDD but same response besides the performance of the machine during examination was very slow, then i tried another WD HDD and it's going to be good ....
thank you ...
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Mostafa Bayome
aplio xv
December 24, 2014 01:37
i have a aplio xv machine
when i copied the original 80 G WD HDD to a 160 G Seagate HDD the timing of the start up loading increasing with the seagate HDD ....
any one know why ??!
to rate and post a comment
WHC
re: aplio xv
December 25, 2014 10:51
Hi, Mostafa!
Hard to say, but it could be some things:
Indexing time increased, due to new higher volume;
Detective HDD;
Fragmentation;
Licenses depending on some HW ID found in the old WD.
After boot finishes, can you tell if the image flow seems right, good performance.
You could try a different HDD, could you?
Great holidays, take care, God Bless.
MAC.
to rate and post a comment
Mostafa Bayome
re: re: aplio xv
December 26, 2014 11:56
i tried another 160G seagate HDD but same response besides the performance of the machine during examination was very slow, then i tried another WD HDD and it's going to be good ....
thank you ...
to rate and post a comment