Dear Colleagues, I have a c arm Arcadis avantic that when release fluoro give an error filament current too low, after some minutes seems that is warm and it goes well , with an strange sound on tube , but when switch to pulsed fluoro give automatically error on D21. Any can help me? , could be the tube , or D21 thanks in advance
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Sergio Garcia Solana
Arcadis avantic
October 05, 2022 10:12
Dear Colleagues,
I have a c arm Arcadis avantic that when release fluoro give an error filament current too low, after some minutes seems that is warm and it goes well , with an strange sound on tube , but when switch to pulsed fluoro give automatically error on D21.
Any can help me? , could be the tube , or D21
thanks in advance
to rate and post a comment
David Smith
re: Arcadis avantic
November 14, 2022 10:12
check the cabling in the c-arm
to rate and post a comment