Problem on CT Lightspeed 16; Application software auto_shutdown.
it has several errors before send host shutdown command,
.
.
Host: ct01 Proc:cupMonitor. Error: 200002357
File: ssProcStop.c Line:107
A HOST_SHUTDOWN was initiated by the unexpected termination of dms since other processes depend on it to come up
System works if I use: setenv NOHOSTSHHUTDOWN, and after starts I run RAID (dark) configuration then I can work normally until I shutdown OC again
Haven't experienced it my self but you can check following things
1)CMOS Battery of DARC & HP PC considering if Power recycle causing some settings changed.
2) Reload DARC Firmware.
Hi GEcase, I'm facing the same problem. I need to restabilish the system, but I dont know where to run RAID(dark) configuration. And when type the command setenv NOSHUTDOWN. Can you explain more detail?
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
GEcase
autoshutdown CT Lightspeed
September 23, 2021 09:44
Problem on CT Lightspeed 16; Application software auto_shutdown.
it has several errors before send host shutdown command,
.
.
Host: ct01 Proc:cupMonitor. Error: 200002357
File: ssProcStop.c Line:107
A HOST_SHUTDOWN was initiated by the unexpected termination of dms since other processes depend on it to come up
System works if I use: setenv NOHOSTSHHUTDOWN, and after starts I run RAID (dark) configuration then I can work normally until I shutdown OC again
to rate and post a comment
Philip
re: autoshutdown CT Lightspeed
September 24, 2021 09:36
Haven't experienced it my self but you can check following things
1)CMOS Battery of DARC & HP PC considering if Power recycle causing some settings changed.
2) Reload DARC Firmware.
to rate and post a comment
Marcelo Brilhante
re: autoshutdown CT Lightspeed
March 04, 2024 10:38
Hi GEcase, I'm facing the same problem. I need to restabilish the system, but I dont know where to run RAID(dark) configuration. And when type the command setenv NOSHUTDOWN. Can you explain more detail?
to rate and post a comment