I have a fault with GE Logiq 500 ultrasound machine, I get the error to start:
SYS ERROR: ERROR SCSI DEVICE: 0.0 CODE: 20166
As I read in the forum can is a HDD error, which can be broken or it may be that the same thing happens to a Logiq 400 managed, had exhausted the timekeeper. If you can help me I appreciate us.
In which of the two connectors? If you can point me in the pages of the manual where it says because I can not find it. And in case you do not get power to the hdd, it may be due?
I have checked the 2 connectors coming out of the plate number 4 and have no voltage (0V). Which is the problem? No power is supplied to the disk. How I can fix it? Thank
In which of the two connectors? If you can point me in the pages of the manual where it says because I can not find it. And in case you do not get power to the hdd, it may be due?
From preventive maintenance through comprehensive cryogen services, BMI-PMI is your trusted partner for new/reconditioned sales, installation, and service of both facility-based and mobile MRI solutions. www.brownsmedicalimaging.com / 800-701-9729
Alfredo José Martinez Perales
Avery GE LOGIC 500 MD
July 16, 2013 08:03
I have a fault with GE Logiq 500 ultrasound machine, I get the error to start:
SYS ERROR: ERROR SCSI DEVICE: 0.0 CODE: 20166
As I read in the forum can is a HDD error, which can be broken or it may be that the same thing happens to a Logiq 400 managed, had exhausted the timekeeper. If you can help me I appreciate us.
to rate and post a comment
Ricardo A. Sanchez
re: Avery GE LOGIC 500 MD
July 16, 2013 06:09
Can you send pictures of the error screen?
to rate and post a comment
SHYJU MON
re: Avery GE LOGIC 500 MD
July 16, 2013 10:30
contact : shyjumon@hotmail.com
to rate and post a comment
Madan
re: Avery GE LOGIC 500 MD
July 17, 2013 09:09
Please check the voltage coming to HDD +12V and +5V DC.
to rate and post a comment
Alfredo José Martinez Perales
re: re: Avery GE LOGIC 500 MD
July 17, 2013 09:15
In which of the two connectors? If you can point me in the pages of the manual where it says because I can not find it. And in case you do not get power to the hdd, it may be due?
to rate and post a comment
Alfredo José Martinez Perales
re: re: re: Avery GE LOGIC 500 MD
July 20, 2013 08:15
I have checked the 2 connectors coming out of the plate number 4 and have no voltage (0V). Which is the problem? No power is supplied to the disk. How I can fix it? Thank
to rate and post a comment
Alfredo José Martinez Perales
re: Avery GE LOGIC 500 MD
July 17, 2013 09:15
In which of the two connectors? If you can point me in the pages of the manual where it says because I can not find it. And in case you do not get power to the hdd, it may be due?
to rate and post a comment