I installed software in a Senographe 2000D from scratch.
I had Premiun view before in this machine
the aws computer is a SUNBLADE 150
Any one kwons how to get thew PREMIUN VIEW INSTALL
after software installation (new hard drives)
from the manual I can send it to you if you give me an email address
SECTION 9
INSTALLATION A AND B (CURRENT RWS
SOFTWARE RELEASE V7, V8 OR V9)
1.Login as sdc if not already logged in as sdc:
console login : sdc [Return]
Password : adw3.1 [Return] (default sdc password is factory loaded)
2.When RWS completes its startup, open a Command Window from the Service Tools submenu within the
Root Menu panel.
Note: DO NOT SWITCH USER TO ROOT.
3.Change to the install directory by typing:
cd /export/home/sdc/install [Return]
4.Run the Premium View installation script:
./install.premiumview XXXXXXX [Return] (where XXXXXXX is the Premium View software key
which is printed on a sheet of paper provided with the Premium View software key floppy diskette.)
Premium View installation successful
5.To validate the Premium View Application, restart the browser and go to the next Section.
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Joe bello
AWS software-instllation from scratch
May 06, 2016 03:15
I installed software in a Senographe 2000D from scratch.
I had Premiun view before in this machine
the aws computer is a SUNBLADE 150
Any one kwons how to get thew PREMIUN VIEW INSTALL
after software installation (new hard drives)
to rate and post a comment
Lenny Place
re: AWS software-instllation from scratch
May 08, 2016 06:04
from the manual I can send it to you if you give me an email address
SECTION 9
INSTALLATION A AND B (CURRENT RWS
SOFTWARE RELEASE V7, V8 OR V9)
1.Login as sdc if not already logged in as sdc:
console login : sdc [Return]
Password : adw3.1 [Return] (default sdc password is factory loaded)
2.When RWS completes its startup, open a Command Window from the Service Tools submenu within the
Root Menu panel.
Note: DO NOT SWITCH USER TO ROOT.
3.Change to the install directory by typing:
cd /export/home/sdc/install [Return]
4.Run the Premium View installation script:
./install.premiumview XXXXXXX [Return] (where XXXXXXX is the Premium View software key
which is printed on a sheet of paper provided with the Premium View software key floppy diskette.)
Premium View installation successful
5.To validate the Premium View Application, restart the browser and go to the next Section.
to rate and post a comment