Booting problem with DARC2 LightSpeed CT

Hi guys,

I'm having a booting issue on the GOC4 console for the LightSpeed, so everything seems booting normal until the HP host doesn't connect properly with the darc, and waits for it to boot up completely, but even if the darc booted properly, the host doesn't see it sometimes.

I've tried to verify the connection:
- ping darc (succesful)
- rsh darc (succesful)
- ping ig1 (succesful) from darc
- ping localhost (succesful) from darc
- ssh darc (succesful)
- service cliservice start
telnet localhost 623
Server: darc
Username:
Password:
Login succesful

- dpccli/ reset
ok
- dpccli/ console (at this point the DARC resets again and when its done, there is a shell window with the following script)
.........
/usr/g/bin/gre-verify-darc: built May 11 2007

ping localhost: waiting...done
ping darc: waiting..........done
ping darc echo: waiting...ssh: connect to host darc port 22: Connection refused....done

OC application version: 07MW11.10.H2_P_M4_G_Zeus
DARC application version: 07MW11.10.H2_P_M4_G_Zeus

darc:/usr/g/config/scanhardware.cfg: rsyncing...done
darc:/dev/shm/gre-raid-lock/gre-raid-exit: waiting...done
darc:/usr/g/service/log/gre-raid-exit-status.log: rsyncing...done
darc:/dev/shm/gre-raid-lock/gre-raid-logmsg: removing...done
darc:/dev/shm/gre-raid-degrated:checking...not found (RAID is not degraded)
darc:/proc/mounts:/raw_data...bash: line 1: 8197 Terminado
attention -nb -ontop -rn GreVerifyDarcWaitingForStarup 2/dev/null /dev/null mount is unknown
gre-raid: failure - not enough hard drives found (exit status: 16)
/usr/g/bin/gre-veryfy-darc: failure -scan disk array is non-recoverable (exit status: 22)

PS. The DARC by itself runs good until See you on the darc side of the moon.

Any help would be appreciated, thanks in advance.