I have a big problem whith a bright speed.After brake down a main power, the system appears the system presented the following faults:
when DAS gain calibration :
error 230017082 row1(8A) out of range, detector chanel 9 value 4,016300.The DAS tool all are green.
I swap the 1,2,3 converter board and nothing.
when Z slope calibration:
DAS converter board encouterd a stage overflow during alpha calibration.
board 1 ASIC/channel: 0x0101
stage 1
board channel 127.
this are the same to board 2, 42 62.
I swap the boards and the board 1 not changed.
the others boards 42 and 62 disapears but board 2 change the 3, swap. now board 6, swap. board 7 them I stoped.
tomorrow I will change to new boards, but I think that has other problem.
everyone have any idea about this
DirectMed Imaging specializes in Equipment Sales, Parts, and Support. Parts are in stock and available for immediate delivery. In-room MRI Upgrades are available now. (855) 463-3727 or sales@directmedimaging.com
cristian oliveira
bright speed DAS error
May 04, 2015 08:39
good day everyone.
I have a big problem whith a bright speed.After brake down a main power, the system appears the system presented the following faults:
when DAS gain calibration :
error 230017082 row1(8A) out of range, detector chanel 9 value 4,016300.The DAS tool all are green.
I swap the 1,2,3 converter board and nothing.
when Z slope calibration:
DAS converter board encouterd a stage overflow during alpha calibration.
board 1 ASIC/channel: 0x0101
stage 1
board channel 127.
this are the same to board 2, 42 62.
I swap the boards and the board 1 not changed.
the others boards 42 and 62 disapears but board 2 change the 3, swap. now board 6, swap. board 7 them I stoped.
tomorrow I will change to new boards, but I think that has other problem.
everyone have any idea about this
thanks
to rate and post a comment
mriserv
re: bright speed DAS error
May 05, 2015 08:37
Reseta DAS Converter cards
if not fixing the issue possible DAS converter card, back plane or cable
to rate and post a comment
cristian oliveira
re: re: bright speed DAS error
May 06, 2015 08:47
can I to do the reset of the converter card? How?
to rate and post a comment
Mr.CT.service
re: re: re: bright speed DAS error
May 18, 2015 04:30
Reset means disconnect and reconnect converter boards.
No to press any reset button.
to rate and post a comment
Vijay Sharma
re: bright speed DAS error
May 05, 2015 08:38
Pls check your DCB..
to rate and post a comment