after battery replacement CT Brightspeed got this:
Host: Brightspeed Proc:scanRx Error: 200501533
File: uiflpcCommonFunctions.c Line:2272
Function: No system function reported
Sevice uif_scan_rxfail to receive a message with event code 3213 from Event Router process with status:
Timed out while attempting to receive message
Mon Oct 20 ...
Host: Brightspeed Proc:scanRx. Error: 200501547
File: uiflpcMgrScanRx.c Line: 11478
Function: Data Acquisition: OC Processing
A Communication Error has occurred in uiflpcSenRecvTubeStateRequest with seq_num = 7 and status=200001821
Mon Oct 20 ....
Host: Brightspeed Proc: scanRx Error: 200501544
File: ZeusrpGlobalActions.c Line :1839
Function: Data Acquisition: OC Processing
getTubeWarming Timings(): Failure had ocurred while performing rxif_getTubeState
When I have seen this error it is usually related the the small din 9 connector on the tube. I would check that plug. I am guessing the battery you are referring to is on the Jedi generator and you are trying to do generator cals and got this error. I believe there is a connector from the generator to the tube that may have been bumped during the battery change or the din 9 that goes to the tube has been disconnected.
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
GEcase
Brightspeed Communication Problem
October 21, 2025 10:27
after battery replacement CT Brightspeed got this:
Host: Brightspeed Proc:scanRx Error: 200501533
File: uiflpcCommonFunctions.c Line:2272
Function: No system function reported
Sevice uif_scan_rxfail to receive a message with event code 3213 from Event Router process with status:
Timed out while attempting to receive message
Mon Oct 20 ...
Host: Brightspeed Proc:scanRx. Error: 200501547
File: uiflpcMgrScanRx.c Line: 11478
Function: Data Acquisition: OC Processing
A Communication Error has occurred in uiflpcSenRecvTubeStateRequest with seq_num = 7 and status=200001821
Mon Oct 20 ....
Host: Brightspeed Proc: scanRx Error: 200501544
File: ZeusrpGlobalActions.c Line :1839
Function: Data Acquisition: OC Processing
getTubeWarming Timings(): Failure had ocurred while performing rxif_getTubeState
any comment to solve it?
to rate and post a comment
medicorpchile
re: Brightspeed Communication Problem
October 22, 2025 08:50
What battery?
to rate and post a comment
FDMEnterprises
re: Brightspeed Communication Problem
January 19, 2026 04:01
When I have seen this error it is usually related the the small din 9 connector on the tube. I would check that plug. I am guessing the battery you are referring to is on the Jedi generator and you are trying to do generator cals and got this error. I believe there is a connector from the generator to the tube that may have been bumped during the battery change or the din 9 that goes to the tube has been disconnected.
to rate and post a comment