I can't install 11BW46.3 for DARC - the process stops on disk checking. It says I've put wrong SOL CD. I've got the new DARC same as the old one, I've already instaled new HOST software from the same CD pack. I've checked versions, all match, but I've got that red screen with error. Please check photos. DARC returns 22 error on it's loadscreen. I've checked bios setting also. What shall I do? Shall I be able to ping DARC with no software? Will appreciate any help.
Yes, Randy so it says the documentation - use os. Actually I've tried all of them. I'll update on 12th of May - found the correct text for my version of the os. Nothing new from what I've done, but will try it step by step from the very begining. Maybe there's something I've missed.
try this..
put the application or os cd on the host cdrom and do not insert the tray.
run darc software loading.
observe that the cdrom tray will get in..
Ivan Bakhvalov
Brightspeed DARC software LFC
May 03, 2016 09:55
I can't install 11BW46.3 for DARC - the process stops on disk checking. It says I've put wrong SOL CD. I've got the new DARC same as the old one, I've already instaled new HOST software from the same CD pack. I've checked versions, all match, but I've got that red screen with error. Please check photos. DARC returns 22 error on it's loadscreen. I've checked bios setting also. What shall I do? Shall I be able to ping DARC with no software? Will appreciate any help.
to rate and post a comment
Carlos Pons
re: Brightspeed DARC software LFC
May 04, 2016 12:14
You may have a problem with the cdreader the cd unit is not fully working, try to replace and try again
to rate and post a comment
randy oswalt
re: Brightspeed DARC software LFC
May 06, 2016 09:52
I don't believe that you use the SOL serial over lan. There should be 3 dve's. O/S applications and SOL. Only use os and apps.
to rate and post a comment
Ivan Bakhvalov
re: re: Brightspeed DARC software LFC
May 06, 2016 03:14
Yes, Randy so it says the documentation - use os. Actually I've tried all of them. I'll update on 12th of May - found the correct text for my version of the os. Nothing new from what I've done, but will try it step by step from the very begining. Maybe there's something I've missed.
to rate and post a comment
randy oswalt
re: re: re: Brightspeed DARC software LFC
May 08, 2016 06:05
When I worked for GE we did get bad software disk sometimes.
to rate and post a comment
John7475
re: Brightspeed DARC software LFC
May 12, 2016 10:21
try this..
put the application or os cd on the host cdrom and do not insert the tray.
run darc software loading.
observe that the cdrom tray will get in..
goodluck..
to rate and post a comment