Burdick quest advances paper one and a half sheets with no print then displays Paper Jam ! i changed the Printer Sensor and then complete printer assy. Also tried another complete computer assy. I also read on google another person had the same problem and changed the sensor twice and the controller board and still the same. Im thinking Printhead calibration ? or motor current monitor ? Any input would be appreciated
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
ultrasoundman
Burdick Quest Paper Jam
April 19, 2015 10:08
Burdick quest advances paper one and a half sheets with no print then displays Paper Jam ! i changed the Printer Sensor and then complete printer assy. Also tried another complete computer assy. I also read on google another person had the same problem and changed the sensor twice and the controller board and still the same. Im thinking Printhead calibration ? or motor current monitor ? Any input would be appreciated
to rate and post a comment
Marek Majewski
re: Burdick Quest Paper Jam
April 20, 2015 10:07
Did you try to replace the paper?
to rate and post a comment
ultrasoundman
re: re: Burdick Quest Paper Jam
April 20, 2015 12:08
Yes ! paper used is 716-0237-00 the problem started after Bios battery was changed
to rate and post a comment
Budi Gunawan
re: Burdick Quest Paper Jam
May 17, 2015 01:18
Change Paralel port mode in bios setting
to rate and post a comment