Hi!
I have o problem with bv pulsera.
Yesterday I called the doctor and was told that after three operations, the image has become worse, lost sharpness. They rebooted the machine, but not run C-Arm.
My first thought was that it took the battery, but when I turn on the c-arm lamp above the key is lit.
When I turn on the system viewing station and a message on the screen below: Mobile station is an alone mode.
A display C-arm is not on. I thought that problem with the switch on/off board.
But when I opened the cover I saw the power on with the C-arm served. A front panel LEDs are lit red. Photos indicators and error list I can send.
It may be necessary to change this block with indicators? Because when I turned on the previously-C-arm inside the relay clicked and the c-Arm was on, now no clicks. Can not run the relay?
I ask for your help!
Dear i have problem with Bv pulsera , not diplay on c-arm,view station is message mobile station is alone mode,I have a similar problem to yours you can help as I have no manual or parts?
Best Regards
PAULO REYES
LIMA PERU
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
Aleksander Proof
BV pulsera C-arm error
May 21, 2013 09:55
Hi!
I have o problem with bv pulsera.
Yesterday I called the doctor and was told that after three operations, the image has become worse, lost sharpness. They rebooted the machine, but not run C-Arm.
My first thought was that it took the battery, but when I turn on the c-arm lamp above the key is lit.
When I turn on the system viewing station and a message on the screen below: Mobile station is an alone mode.
A display C-arm is not on. I thought that problem with the switch on/off board.
But when I opened the cover I saw the power on with the C-arm served. A front panel LEDs are lit red. Photos indicators and error list I can send.
It may be necessary to change this block with indicators? Because when I turned on the previously-C-arm inside the relay clicked and the c-Arm was on, now no clicks. Can not run the relay?
I ask for your help!
to rate and post a comment
Chris Baklik
re: BV pulsera C-arm error
May 26, 2013 03:52
I can help email me crisb1955@aol.com I have the service manuals if needed
to rate and post a comment
Marie Martinez
re: re: BV pulsera C-arm error
June 18, 2013 11:40
Can I get a copy of your service manual
to rate and post a comment
Marie Martinez
re: re: BV pulsera C-arm error
June 18, 2013 11:40
My email is pmeconsulting@verizon.net
to rate and post a comment
Qaiser Anwar
re: re: BV pulsera C-arm error
May 27, 2014 10:20
Can you send me the service manual of BV pulsera C-arm. I need this manual. My email is qanwer4all@gmail.com
to rate and post a comment
Aleksander Proof
re: BV pulsera C-arm error
May 27, 2013 08:44
Friends!
Problem is found!
Thank you all for your help!
to rate and post a comment
JUAN PAULO REYES CASTILLO
re: BV pulsera C-arm error
June 17, 2014 03:53
Dear i have problem with Bv pulsera , not diplay on c-arm,view station is message mobile station is alone mode,I have a similar problem to yours you can help as I have no manual or parts?
Best Regards
PAULO REYES
LIMA PERU
to rate and post a comment