I have no fluoro neigther,prep. hand/fotswitch, only can see variations on tv monitor, need service manual with schematics, can any one help?. E-mail: antolinrayosx@hotmail.com, thanks in advance.
re: re: re: BV25 with pushbuttons operator console
November 04, 2015 03:36
Hello
Now open the upper carter of the tune; you will found a connector plus two big wires.
Disconnect the big wires and connect them with a filament lamp 220 v 60 w.
Make fluoro plus prep and xray.
Tell me if lamp go on
Regards
Umberto
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
toni
BV25 with pushbuttons operator console
November 03, 2015 08:24
I have no fluoro neigther,prep. hand/fotswitch, only can see variations on tv monitor, need service manual with schematics, can any one help?. E-mail: antolinrayosx@hotmail.com, thanks in advance.
to rate and post a comment
umberto sciunnach
re: BV25 with pushbuttons operator console
November 03, 2015 06:03
Hello
Witch type of bv 25 philips only or pulsera ??
You have fluoro images on the monitor ?
Let me know regards
Umberto
to rate and post a comment
Santosh Kumar Tiwari
re: re: BV25 with pushbuttons operator console
November 04, 2015 08:23
I Have this Please write me trivenibiotronix@gmail.com
to rate and post a comment
toni
re: re: BV25 with pushbuttons operator console
November 04, 2015 01:47
No X-rays on generator, neither image, only noise during hand/foot swuitch.
to rate and post a comment
toni
re: re: BV25 with pushbuttons operator console
November 04, 2015 01:47
only BV 25.
to rate and post a comment
umberto sciunnach
re: re: re: BV25 with pushbuttons operator console
November 04, 2015 03:36
Hello
Now open the upper carter of the tune; you will found a connector plus two big wires.
Disconnect the big wires and connect them with a filament lamp 220 v 60 w.
Make fluoro plus prep and xray.
Tell me if lamp go on
Regards
Umberto
to rate and post a comment