We service accounts with this analyzer and have had a rash of failed LCD flat screens lately. Our replacement modules are gone. There are at least four different versions of the display hardware. A flat screen monitor can be hooked up to the VGA output on the CPU board. This is a good temp. fix but bad for ease of operation. I am looking for an open frame 10.4" monitor that could be mounted to the existing location. A self contained unit powered by either 120VAC or 12VDC with a standard D connector VGA input is needed. Ideas?
not sure if this will work but I have used several from this company in the past for other applications and a lot less than OEM.
http://store.earthlcd.com/OF-10-4-VGA
Therapeutic Technologies closeout auctions take place on DOTmed.com. Bid today on 538 lots of medical equipment. Inspections may be done by appointment. Hours are Monday through Friday 9am-4pm Contact chrisnuytens1@gmail.com to schedule.
Austin Fregia
Cell-Dyn 1800 Display
October 10, 2013 04:13
We service accounts with this analyzer and have had a rash of failed LCD flat screens lately. Our replacement modules are gone. There are at least four different versions of the display hardware. A flat screen monitor can be hooked up to the VGA output on the CPU board. This is a good temp. fix but bad for ease of operation. I am looking for an open frame 10.4" monitor that could be mounted to the existing location. A self contained unit powered by either 120VAC or 12VDC with a standard D connector VGA input is needed. Ideas?
to rate and post a comment
Lenny Place
re: Cell-Dyn 1800 Display
October 10, 2013 09:53
not sure if this will work but I have used several from this company in the past for other applications and a lot less than OEM.
http://store.earthlcd.com/OF-10-4-VGA
to rate and post a comment