I´m going to ask for something almost impossible.
I´ll go in next month to the Sahara refugees camps. They have a Jurassic X ray device called INTEGRALIX manufactured by CGR ancient GE. Of course they don´t have any technical information so I´ll try to fix the equipment completely blind. Does anybody know something similar?
Dear Fernando,
many many years ago i installed one mahine like the one you are talking about.
it is a small machine 300 mA, very old and most electromechanical the timer is a board some transistors that is all , but very simple, selector knobs for parameters, if you go to the field and check that machine you could contact me and i could try to find some information over there not manual at all but schematics.
thank you and good luck
annorys1971@att.net.mx
I know something about this machine. Very simple electromecanic basis.
It is a low frequency 300 mA X-ray Generator and table only.
The operator console is composed by eletrical rotatory keys.
Don´t you know what the costumer explain about the fail?
May I help you?
The problem is that the people who installed the machine did not know too much concerning X-ray devices. The told me that the anode is runing when you press the first trigger button but no X ray is emitted.On the other hand the hospital is supplied by means of a petrol group. Thus in the moment of the X-ray maybe the group can´t give enough current which can be around 80 amps.
So i´m not sure if there is a real damage perhaps the problem is located on the supply itself.
I´ll really appreciate if somebody can give some squematics.
Best regards
Fernando
Hello Fernando
RESPECT YOUR COMMENTS,THOSE MACHINE ONLY HAVE FIRST TIME TRIGGER BUTTOM. FIRST OF ALL IF THEY CAN CHECK SOMETHING,THEY MUST TAKE OFF THE COLLIMATOR TO SEE IF THE FILAMENTS INCRESE WHEN THE BUTTOM IS PRESSED.
ABOUT THE PETROL GROUP WHO SUPPLY ENERGY IS PROBABLY IF MACHINE IS WIRED CORRECTLY BLOWN SOME FUSES IN CASE NOT REACH 80 AMP FROM THE SUPPLY.
THERE ARE DIFFERENT INTEGRALIX MODELS.cOULD YOU SEND ME PICS FROM INSIDE TO SEE IF I CAN HELP
EDUARDO
We work with hospitals providing reliable ultrasound systems, probes & parts. By offering sales, service, rentals & repairs, we help our clients access high quality imaging systems while keeping costs low & support simple. Please call 760-834-4777!
Fernando Canga
CGR INTEGRALIX schematics
April 02, 2009 05:50
Hi,
I´m going to ask for something almost impossible.
I´ll go in next month to the Sahara refugees camps. They have a Jurassic X ray device called INTEGRALIX manufactured by CGR ancient GE. Of course they don´t have any technical information so I´ll try to fix the equipment completely blind. Does anybody know something similar?
I´ll really appreciate any help given
Thanks all
Fernando
to rate and post a comment
Hipolito Jorge Iglesias
Re: CGR INTEGRALIX schematics
April 02, 2009 04:18
Dear Fernando,
many many years ago i installed one mahine like the one you are talking about.
it is a small machine 300 mA, very old and most electromechanical the timer is a board some transistors that is all , but very simple, selector knobs for parameters, if you go to the field and check that machine you could contact me and i could try to find some information over there not manual at all but schematics.
thank you and good luck
annorys1971@att.net.mx
to rate and post a comment
Fernando Canga
Re: CGR INTEGRALIX schematics
April 03, 2009 03:04
Dear Hipolito
I send you an email with some pictures.
Thank you very much
Fernando
to rate and post a comment
Ricardo Faria
Re: CGR INTEGRALIX schematics
April 02, 2009 10:04
I know something about this machine. Very simple electromecanic basis.
It is a low frequency 300 mA X-ray Generator and table only.
The operator console is composed by eletrical rotatory keys.
Don´t you know what the costumer explain about the fail?
May I help you?
Ricardo - Brasil
to rate and post a comment
Fernando Canga
Re: CGR INTEGRALIX schematics
April 03, 2009 02:38
Thanks both for your help.
I´ll contact you separately to gahter some information before my travel.
Best regards
Fernando
to rate and post a comment
Fernando Canga
Re: CGR INTEGRALIX schematics
April 03, 2009 02:58
The problem is that the people who installed the machine did not know too much concerning X-ray devices. The told me that the anode is runing when you press the first trigger button but no X ray is emitted.On the other hand the hospital is supplied by means of a petrol group. Thus in the moment of the X-ray maybe the group can´t give enough current which can be around 80 amps.
So i´m not sure if there is a real damage perhaps the problem is located on the supply itself.
I´ll really appreciate if somebody can give some squematics.
Best regards
Fernando
to rate and post a comment
eduardo medina
Re: CGR INTEGRALIX schematics
April 10, 2009 12:00
Hello Fernando
RESPECT YOUR COMMENTS,THOSE MACHINE ONLY HAVE FIRST TIME TRIGGER BUTTOM. FIRST OF ALL IF THEY CAN CHECK SOMETHING,THEY MUST TAKE OFF THE COLLIMATOR TO SEE IF THE FILAMENTS INCRESE WHEN THE BUTTOM IS PRESSED.
ABOUT THE PETROL GROUP WHO SUPPLY ENERGY IS PROBABLY IF MACHINE IS WIRED CORRECTLY BLOWN SOME FUSES IN CASE NOT REACH 80 AMP FROM THE SUPPLY.
THERE ARE DIFFERENT INTEGRALIX MODELS.cOULD YOU SEND ME PICS FROM INSIDE TO SEE IF I CAN HELP
EDUARDO
to rate and post a comment
eduardo medina
Re: CGR INTEGRALIX schematics
April 13, 2009 04:58
Fernando
my email is lemedina1964@yahoo.com
to rate and post a comment