MIT labs, experts in Multi-Vendor component level repair of: MRI Coils, RF amplifiers, Gradient Amplifiers Contrast Media Injectors. System repairs, sub-assembly repairs, component level repairs, refurbish/calibrate. info@mitlabsusa.com/+1 (305) 470-8013
Manuel Esquer
CODONICS AE title info
January 17, 2013 10:01
I have a CODONCS GS multiformat imager
but Im trying to connect on DICOM network, How can I get Networ info (Host name & AE Title), because wit MENU-UTILITIES-IMAGER INFO-Network Info, AE Title and Host name do not appears
Thank you
to rate and post a comment
Nickolay Danev
re: CODONICS AE title info
January 18, 2013 10:06
Print_SCP
to rate and post a comment
Manuel Esquer
re: re: CODONICS AE title info
January 18, 2013 06:25
And what about HOST NAME?
to rate and post a comment
Brian Seltzer
re: CODONICS AE title info
January 18, 2013 05:44
make sure it has dicom in options
to rate and post a comment
Carlos Duran
re: CODONICS AE title info
January 18, 2013 06:25
The AE_title is
Print_SCP. ....watch capital characters
The ip appears at begining of boot, at display....dont blink your eyes at this phase.
The listen pot is 104.
Sometimes, when you use certain dicom softwares, are not unable to send to codonics...look your properties and try to do a Dicom Ping command...( not the ping of nets)....sometimes net's pings works fine, but dicom is in fail....
to rate and post a comment
Doscar Ernesto Perez Pereyra
re: CODONICS AE title info
January 18, 2013 07:23
Read de Operation manual for Codonics, is very easy the configurarion. The AE Tittle is very needed for Custom Job Setting. [ Where you edit the contrast, gamma e ect for any equip. (( CT, MRI e ect. )) ].
to rate and post a comment
Borhan Kalash
re: CODONICS AE title info
January 19, 2013 11:29
Dear Manuel
as i remember there was a service menu which has more options
press right arrow and the menu keys(togeyher) to get the full menu
locate the network and look for the info you need
to rate and post a comment