Hello friends
I have problems with Codonics images Horizon (Multi -Media GS)
Team begins well, but not finished making mechanical testing, moving roller plate and trays, again and again, then displays this error screen "Unable printer".
Note the Error Logs Engine and shows the following:
"Thu May 5 18:57:11 2016: ERROR:
Engine posted Initialize error.
Thu May 5 18:57:10 2016: ERROR:
Error 20 SUBCOMMAND failure,
BUSY state engine previous State
Hi i supposed that you checked the 7 voltages from the P.S. if yes ,clean the movements sensors with air compressed,your problem seems that the system can not reach the ººHome Positionºº ,`cause this. good luck.
Specializing in GE, we keep your ICU monitors calibrated and patient-ready—fast, reliable service from expert biomed techs. Southeastern Biomedical: 888-310-7322.
CODONICS ERROR
May 13, 2016 10:14
Hello friends
I have problems with Codonics images Horizon (Multi -Media GS)
Team begins well, but not finished making mechanical testing, moving roller plate and trays, again and again, then displays this error screen "Unable printer".
Note the Error Logs Engine and shows the following:
"Thu May 5 18:57:11 2016: ERROR:
Engine posted Initialize error.
Thu May 5 18:57:10 2016: ERROR:
Error 20 SUBCOMMAND failure,
BUSY state engine previous State
Thu May 5 18:57:10 2016: ERROR: 32
posted, command: 81,
HomePlatenClutch
Thu May 5 18:57:10 2016: ERROR:
HomePlatenClutch: Failed range
Thu May 5 18:57:10 2016: ERROR:
J-EngineController [1674]:
ERROR : Failure to initialize
engine
Thu May 5 18:57:10 2016: ERROR:
J-EngineController [1674]:
ERROR : Engine controller
failed to initialize the engine to a
sane state. "
I hope will help me with this error.
Thank you very much for reading.
to rate and post a comment
BENITO MONTOYA VARELA
re: CODONICS ERROR
May 20, 2016 07:47
Hi i supposed that you checked the 7 voltages from the P.S. if yes ,clean the movements sensors with air compressed,your problem seems that the system can not reach the ººHome Positionºº ,`cause this. good luck.
to rate and post a comment