After reinstall software on host and darc when try to startup on host i have error ssh connection refused port 22. But rsh darc works. sshd service on darc don't autostart. If i manualy restart sshd anyway it doesn't work due autentification error. OS version 6.3.11
Thx for help. After config_sshd ssh works. Now during startup i have OS mathching error can't find swhwinfo on darc. I check $PATH on darc and copy swhwinfo from /usr/g/bin to /usr/bin. Now i have succsessful startup on host. But i'm starting it wihout connect to gantry and afraid that somthing else can be wrong on darc. Is it normal with older systems trouble with sshd and lost swhwinfo after full reinstall.(I did everything like in instructions and there was no errors during installation)
If the rsh is successful, but the ssh command still fails, Application software will not start properly and the system will eventually halt. Perform the following to correct for port 22 unknown Host issues:
Open a Unix Shell and become root:
{ctuser@hostname} su -
Password:
[root@hostname] config_sshd
A message will appear:
[config_sshd] Setting up sshd on oc and darc for root and ctuser accounts.
Thx for help. After config_sshd ssh works. Now during startup i have OS mathching error can't find swhwinfo on darc. I check $PATH on darc and copy swhwinfo from /usr/g/bin to /usr/bin. Now i have succsessful startup on host. But i'm starting it wihout connect to gantry and afraid that somthing else can be wrong on darc. Is it normal with older systems trouble with sshd and lost swhwinfo after full reinstall.(I did everything like in instructions and there was no errors during installation)
If the rsh is successful, but the ssh command still fails, Application software will not start properly and the system will eventually halt. Perform the following to correct for port 22 unknown Host issues:
Open a Unix Shell and become root:
[root@hostname] config_sshd
A message will appear:
[config_sshd] Setting up sshd on oc and darc for root and ctuser accounts.
Ophthalmic-focused expertise in YAG systems including repair, maintenance and calibration handled with precision by trained professionals. Request service • sales@laserlocators.com • 1-877-924-2020
nickchipper
Ct Brightspeed elite
August 06, 2018 08:31
After reinstall software on host and darc when try to startup on host i have error ssh connection refused port 22. But rsh darc works. sshd service on darc don't autostart. If i manualy restart sshd anyway it doesn't work due autentification error. OS version 6.3.11
to rate and post a comment
Scott Anderson
re: Ct Brightspeed elite
August 06, 2018 08:17
Did run run config_sshd from the host computer?
to rate and post a comment
nickchipper
re: re: Ct Brightspeed elite
August 07, 2018 09:37
Thx for help. After config_sshd ssh works. Now during startup i have OS mathching error can't find swhwinfo on darc. I check $PATH on darc and copy swhwinfo from /usr/g/bin to /usr/bin. Now i have succsessful startup on host. But i'm starting it wihout connect to gantry and afraid that somthing else can be wrong on darc. Is it normal with older systems trouble with sshd and lost swhwinfo after full reinstall.(I did everything like in instructions and there was no errors during installation)
to rate and post a comment
Scott Anderson
re: Ct Brightspeed elite
August 06, 2018 08:17
Did you run config_sshd from the host computer?
to rate and post a comment
CRAIG WAMBURA
re: Ct Brightspeed elite
August 06, 2018 08:17
If the rsh is successful, but the ssh command still fails, Application software will not start properly and the system will eventually halt. Perform the following to correct for port 22 unknown Host issues:
Open a Unix Shell and become root:
{ctuser@hostname} su -
Password:
[root@hostname] config_sshd
A message will appear:
[config_sshd] Setting up sshd on oc and darc for root and ctuser accounts.
Starting sshd: [OK]
Starting sshd: [OK]
to rate and post a comment
nickchipper
re: re: Ct Brightspeed elite
August 07, 2018 09:36
Thx for help. After config_sshd ssh works. Now during startup i have OS mathching error can't find swhwinfo on darc. I check $PATH on darc and copy swhwinfo from /usr/g/bin to /usr/bin. Now i have succsessful startup on host. But i'm starting it wihout connect to gantry and afraid that somthing else can be wrong on darc. Is it normal with older systems trouble with sshd and lost swhwinfo after full reinstall.(I did everything like in instructions and there was no errors during installation)
to rate and post a comment
CRAIG WAMBURA
re: re: re: Ct Brightspeed elite
August 07, 2018 04:00
Did you reconfig the Scan Data Disk?
Ensure that there is no software mismatch between host and darc
Check the OS revision you used to perform the LFC or redo the LFC...
to rate and post a comment
Gilrubio
re: Ct Brightspeed elite
August 06, 2018 08:17
As root:
config_sshd in host
wait for DARC to boot
to rate and post a comment
CRAIG WAMBURA
re: Ct Brightspeed elite
August 06, 2018 08:17
If the rsh is successful, but the ssh command still fails, Application software will not start properly and the system will eventually halt. Perform the following to correct for port 22 unknown Host issues:
Open a Unix Shell and become root:
[root@hostname] config_sshd
A message will appear:
[config_sshd] Setting up sshd on oc and darc for root and ctuser accounts.
Starting sshd: [OK]
Starting sshd: [OK]
to rate and post a comment
VENGE
re: Ct Brightspeed elite
August 06, 2018 08:18
Hi!. Firstly, could you tell me the reason why you had to reinstall the software?.
to rate and post a comment
nickchipper
re: re: Ct Brightspeed elite
August 07, 2018 09:36
before reinstall i had error
gre-rad:failure - unable to find matching RAID specification
I cheked all HDD and no badblocks
to rate and post a comment