I replace the tow with new ones and tried to load the software (CTT 4.5.1)- bios is set as required as for booting priority .
After Putting the CD in CD WR Drive and switching console on , I got the following on screen :
- Booting from CD :- ( after almost 1 minut ), the following message appears :
- Booting Disk Failure ;insert system disk and press inter .
Now , the above is all I get and I can not load the OS software .
Please help me solving the problem .
Appreciating highly .
Hello,
This shows that your system is unable to read CDROM Drive. Please check again the boot sequence of computer as CDROM should be first. Also you can connect external CDROM via USB to load software but have to change Boot sequence accordingly.
Any support required, feel free to call +91 98112 00282 or Skype radimage1.
Hello Deepak , Nice to hear you again . In fact I have tried to catch you at your email many times regarding problem in another same system , but I got no reply from you . Do you have same email ?
You are not inserting the OS cd. When you insert the OS cd rom the syste will ask you to choose between US or International set up. After the OS installation, it will ask you for the application CD. More info hvelazquezm@gmail.com
I have succeeded to load OS after changing the HDDs ; CD software was bad and that was why the problem I first mentioned.
1) As I need to load the applications ,I pressed ENTER for the system to reboots . After the system booted up , a window appears asking for the Username and Password .
I did not assign any usernames or passwords when I was loading the software , so why system asks for username and password ?
2) Another problem encountered every now and then,SCSI controller list dose not appear on system booting, hence no detection to DVD Ram Drive.
I tried to log into ( Lunix rescue ) in an attempt to reset any P.words , but I failed because CD Drive not detected and Message ( Error Read CD ; restart ) appears
Lightly used system available direct from the end user customer. MONARCH QUEST
Featuring our most advanced, data-driven navigation software with AI-Powered algorithms & advanced imaging integration with the GE HealthCare OEC 3D C-arm.
CT/e single slice -Lunix Computer
March 14, 2014 09:28
The problem :
System and raw data disks damaged .
I replace the tow with new ones and tried to load the software (CTT 4.5.1)- bios is set as required as for booting priority .
After Putting the CD in CD WR Drive and switching console on , I got the following on screen :
- Booting from CD :- ( after almost 1 minut ), the following message appears :
- Booting Disk Failure ;insert system disk and press inter .
Now , the above is all I get and I can not load the OS software .
Please help me solving the problem .
Appreciating highly .
to rate and post a comment
engtiseer
re: CT/e single slice -Lunix Computer
March 14, 2014 06:14
What is the ct module and company and what is the software version
to rate and post a comment
engtiseer
re: CT/e single slice -Lunix Computer
March 14, 2014 06:14
My mail tiseerissa1980@gmail.com
to rate and post a comment
Galal
re: re: CT/e single slice -Lunix Computer
March 15, 2014 12:09
It a GE Make . Model CT/e , SW CTT 4.5.1
to rate and post a comment
Raul Elizalde
re: CT/e single slice -Lunix Computer
March 15, 2014 12:08
Hello send me your email To help you, raul.elizalde.sti@gmail.com
to rate and post a comment
Galal
re: re: CT/e single slice -Lunix Computer
March 17, 2014 08:53
Hello fiend
Any help in this regard will be appreciated
enggalal.ha@gmail.com
to rate and post a comment
Deepak Roy Sharma
re: CT/e single slice -Lunix Computer
March 15, 2014 12:09
Hello,
This shows that your system is unable to read CDROM Drive. Please check again the boot sequence of computer as CDROM should be first. Also you can connect external CDROM via USB to load software but have to change Boot sequence accordingly.
Any support required, feel free to call +91 98112 00282 or Skype radimage1.
Deepak
to rate and post a comment
Galal
re: re: CT/e single slice -Lunix Computer
March 16, 2014 04:00
Hello Deepak , Nice to hear you again . In fact I have tried to catch you at your email many times regarding problem in another same system , but I got no reply from you . Do you have same email ?
to rate and post a comment
HECTOR VELAZQUEZ
re: CT/e single slice -Lunix Computer
March 15, 2014 12:10
You are not inserting the OS cd. When you insert the OS cd rom the syste will ask you to choose between US or International set up. After the OS installation, it will ask you for the application CD. More info hvelazquezm@gmail.com
to rate and post a comment
Galal
re: re: CT/e single slice -Lunix Computer
March 16, 2014 04:00
Thank you so much .. in fact I did insert the CD of OS . Unfortunately no response !
to rate and post a comment
Galal
re: CT/e single slice -Lunix Computer
March 20, 2014 11:22
Dear gentlemen ..
I have succeeded to load OS after changing the HDDs ; CD software was bad and that was why the problem I first mentioned.
1) As I need to load the applications ,I pressed ENTER for the system to reboots . After the system booted up , a window appears asking for the Username and Password .
I did not assign any usernames or passwords when I was loading the software , so why system asks for username and password ?
2) Another problem encountered every now and then,SCSI controller list dose not appear on system booting, hence no detection to DVD Ram Drive.
I tried to log into ( Lunix rescue ) in an attempt to reset any P.words , but I failed because CD Drive not detected and Message ( Error Read CD ; restart ) appears
Please help
Regards
to rate and post a comment
Galal
re: re: CT/e single slice -Lunix Computer
March 22, 2014 09:25
hello there ...
no one can advice !!!!
to rate and post a comment