Your Email:
CTI ERROR LISTING please help
July 19, 2012 11:16
I need GE HSA/CTI error code listings please help me tomcharles41@yahoo.com
to rate and post a comment
TOM CHARLES
re: CTI ERROR LISTING please help
July 21, 2012 03:47
If some one have please help me
Awodem Alain
July 21, 2012 09:29
what is the problem with your system?
re: re: CTI ERROR LISTING please help
July 22, 2012 12:34
1) We have A cti scanner so its State MOD is lost 2) Its one SBC hard drive was crashed so we replaced SBC disk drive and perform LFC 3) And we dumped the state files of another CTI scanner on this scanner and then perform AIR and PHANOM CALS 4) Now this scanner is getting Ring artifact collimator data is properly entered I have checked slipring and brushes also OK And when i go for Qcal so in HEATQcal it stops with the error shown below 1317401106 0 1 Fri Sep 30 16:45:06 2011 252419 4 CT01 FEP CoordinateMode fepcheckarith.c 1.2 fepcheckarith 80 Function: Data Acquisition : Scan Data Acquisition Scan: 65001/6/1 Type: Xray-on Axial Scan Seq: 283001 DSP 0 detected overflow and underflow at line 356, input views: 0 EN 305 SR 305 1317401106 1 1 Fri Sep 30 16:45:06 2011 252419 4 CT01 FEP CoordinateMode fepcheckarith.c 1.2 fepcheckarith 80 Function: Data Acquisition : Scan Data Acquisition Scan: 65001/6/1 Type: Xray-on Axial Scan Seq: 283001 DSP 1 detected overflow and underflow at line 356, input views: 0
July 22, 2012 12:35
send me your email i will write in detail
re: re: re: CTI ERROR LISTING please help
July 22, 2012 01:12
awodemalain@gmail.com
BMI-PMI services nearly every make, model, and modality through our nationwide team of nearly 200 local service engineers. Flexible contracts, 24/7 remote monitoring, and ISO 13485 certification. www.brownsmedicalimaging.com / 800-701-9729
CTI ERROR LISTING please help
July 19, 2012 11:16
I need GE HSA/CTI error code listings please help me
tomcharles41@yahoo.com
to rate and post a comment
TOM CHARLES
re: CTI ERROR LISTING please help
July 21, 2012 03:47
If some one have please help me
to rate and post a comment
Awodem Alain
re: CTI ERROR LISTING please help
July 21, 2012 09:29
what is the problem with your system?
to rate and post a comment
TOM CHARLES
re: re: CTI ERROR LISTING please help
July 22, 2012 12:34
1) We have A cti scanner so its State MOD is lost
2) Its one SBC hard drive was crashed so we replaced SBC disk drive and perform LFC
3) And we dumped the state files of another CTI scanner on this scanner and then perform AIR and PHANOM CALS
4) Now this scanner is getting Ring artifact
collimator data is properly entered
I have checked slipring and brushes also OK
And when i go for Qcal so in HEATQcal it stops with the error shown below
1317401106 0 1 Fri Sep 30 16:45:06 2011 252419 4
CT01 FEP CoordinateMode
fepcheckarith.c 1.2 fepcheckarith 80
Function: Data Acquisition : Scan Data Acquisition
Scan: 65001/6/1 Type: Xray-on Axial Scan Seq: 283001
DSP 0 detected overflow and underflow at line 356, input views: 0
EN 305
SR 305
1317401106 1 1 Fri Sep 30 16:45:06 2011 252419 4
CT01 FEP CoordinateMode
fepcheckarith.c 1.2 fepcheckarith 80
Function: Data Acquisition : Scan Data Acquisition
Scan: 65001/6/1 Type: Xray-on Axial Scan Seq: 283001
DSP 1 detected overflow and underflow at line 356, input views: 0
to rate and post a comment
TOM CHARLES
re: re: CTI ERROR LISTING please help
July 22, 2012 12:35
send me your email i will write in detail
to rate and post a comment
Awodem Alain
re: re: re: CTI ERROR LISTING please help
July 22, 2012 01:12
awodemalain@gmail.com
to rate and post a comment